Cooper Lighting PAR30 120V specifications Combolight, Next Generation Recessed Multi-LampFixture

DESCRIPTION

An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes FOUR (4) PAR30 120V lamps in a 2x2 square configuration.

For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

Type

Date

A.... Housing

Housing, junction box & trimless meshplate assembly are all steel construction. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes

a beveled “knife-edge” lips to ensure a clean edge. Can accommodate 0.50” to 1.25” ceiling thickness. Optional Chicago Plenum configuration available.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through

branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.

D... Electrical

Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Electrical components on individually removable “trays” for easy maintenance.

E.... Lamps

Four (4) PAR30 120V lamps mounted in adjustable double gimbals. Lamp holders are individually removable and may be re- gressed 1” for additional cut-off. Lamp can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º locking lamp adjustment. Beveled-edge lamp ring

is secured with threadless, bayonet ac- tion. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. base sockets.

F.... Mounting

Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure. Perforated flaps along housing sides for securing trimless insert to fixture and drywall.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 12.18” x 12.18”

COMBOLIGHT®

Next Generation

Recessed

Multi-Lamp Fixture

Four (4) Light Square PAR30 120V

New Construction

Housing

Trimless

23.87”

17.70”

21.83”

7.45”

Double Gimbal

45º x 45º

Adjust

Thermal

Protector

17.70”

11.38”

5.69”

Electrical Enclosure Wiriing Compartment

Perforated

Meshplate

11.38”

For use with PAR30 120V lamps 75W max.

Electrical Enclosure Wiriing Compartment

ORDERING INFORMATION

CX

N

120

N

N

Configuration			Lamp Type / Wattage Label
CX = COMBOLIGHT			075P30 = 75 Watt max. PAR30 120V
Recessed Four (4) Light
Square
	Housing
	N =	New Construction
	C =	Chicago Plenum

Primary Voltage 1 = 120V

Power Supply

N = None - Line Voltage Lamp

Lamp Mechanism

G = Double Gimbal

R = Retractable Double Gimbal

Trim Insert

N = Trimless

Trim Insert Finish

N = Trimless

Housing Interior/Electrical Door/Sleeve Finish

W = White

B = Black

S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 042408

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031