Cooper Lighting QCT905RMMH specifications Quiet Ceiling, Trimless, Remodel, Metal Halide, Housing

DESCRIPTION
					Catalog #			Type
Remodel housing for Quiet Ceiling round trimless fixtures. Includes
electronic metal halide ballast for use with 20W or 39W MR16 Metal Halide
					Project
lamp.
For insulated ceiling applications. Insulation must be kept 3” from all sides					Comments			Date
and at least 1” above the housing.
					Prepared by
	SPECIFICATION FEATURES
A....Housing
Housing and plaster frame: 18 gauge CRS			D....Lamp
with flat black powder coated internal
			MR16 metal halide lamp 20 or 39 watts.
finish. Adjustable trimless meshplate
			GX10 TAL lamp socket included. Provides
and swing-out retaining brackets
can accomodate up to 1-3/8” ceiling			360º rotation of trim and secures original			Ceiling mudding compound is applied
			trim position after relamping.
thickness.						right to the edge of the fixture.
B....System Protection:			E....Mounting
			Housing is scored with three adjustable
Thermal protection provided to guard
			swing-out retaining brackets.
against overheating and misuse of
			Adjustment is made from countersunk
insulation over and asquare fixture.							QUIET CEILING
			Perforated meshplate may be secured
Vent holes in housing provide cooler
			screws on the face of the mesh plate.
operation.			to drywall and/or joists (by others) for					TRIMLESS
C....Electrical			additional support.
Integral j-box and electronic metal			Ceiling Cut-Out: 7.10” dia.
halide ballast. 120V/277V input. Junction							QCT905RMMH
box is U.L. listed for through branch
wiring. Includes four 1/2 trade size								Remodel
knockouts. J-box and ballast enclosure								Metal Halide
are connected to the housing via flexible
conduit.								Housing
							for Square Trim
		9.48”
							FOR METAL HALIDE MR16
				12.00”		12.00”
								20W or 39W

Ceiling

Cut-Out

7.10” dia.

5.20”

Up to 1-3/8”

ORDERING INFORMATION

QCT905RMMH

Housing QCT905RMMH = Quiet Ceiling Remodel Housing for Square Trim

w/Integral Metal Halide Ballast

Lamp Wattage

20 = 20 watts

39 = 39 watts

Voltage

120 = 120 volts primary

277 = 277 volts primary

Specifications and Dimensions subject to change without notice. rev. 030108

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349- 3031