Cooper Lighting T4 G8.5 specifications Housing, System Protection, Junction Box, Electrical

DESCRIPTION

An adjustable Single-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes ONE (1) T4 G8.5 Metal Halide lamp.

For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

Type

Date

A.... Housing

Housing, junction box & trimless meshplate assembly are all steel construction. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes

a beveled “knife-edge” lips to ensure a clean edge. Can accommodate 0.50” to 1.25” ceiling thickness. Optional Chicago Plenum configuration available.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through

branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.

D... Electrical

Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic metal halide ballasts on individually removable “trays” for easy maintenance. May also be con- figured for remote power.

E.... Lamps

One (1) T4 G8.5 Metal Halide lamp with reflector mounted in adjustable double gimbal. Lamp holder is individually remov- able and may be regressed 1” for additional cut-off. Lamp can accept up to three opti- cal accessories (i.e. lens + hex louver +

snoot). 45º x 45º locking lamp adjustment. Beveled-edge lamp ring is secured with threadless, bayonet action. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes G8.5 socket.

F.... Mounting

Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure. Perforated flaps along housing sides for securing trimless insert to fixture and drywall.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 7.49” x 7.49”

COMBOLIGHT®

Next Generation

Recessed

Single-Lamp Fixture

One (1) Light T4 G8.5 Metal Halide

New Construction

Housing

Trimless

16.01”

13.01”

Double

Gimbal

9.45”

17.14”

13.01”

6.69”

45º x 45º

Adjust

T4 G8.5 Lamp with Reflectors

This fixture utilizes T4 Metal Halide lamp and includes high- performance clear aluminum reflectors in narrow, medium, or wide distributions. Non-standard color reflectors are available upon request.

6.69”

Integral Electronic
Metal Halide Ballast	Thermal
	Protector

ORDERING INFORMATION

C1

E

N

Configuration			Lamp Type / Wattage Label / Reflector Type
C1 = COMBOLIGHT Recessed			039T4N = 39 Watt T4 G8.5 Metal Halide / Narrow
One (1) Light			039T4M = 39 Watt T4 G8.5 Metal Halide / Medium
			039T4W = 39 Watt T4 G8.5 Metal Halide / Wide
			070T4N = 70 Watt T4 G8.5 Metal Halide / Narrow
			070T4M = 70 Watt T4 G8.5 Metal Halide / Medium
			070T4W = 70 Watt T4 G8.5 Metal Halide / Wide
	Housing
	N =	New Construction
	C =	Chicago Plenum

		Power Supply			Lamp Mechanism			Trim Finish
		Voltage			G = Double Gimbal			W = White
		1	= 120V		R = Retractable Double Gimbal			B = Black
	2		= 277V					S = Industrial Silver
Power Supply				Trim Insert		Housing Interior/Electrical Door
E = Electronic Metal Halide				N = Trimless		/Sleeve Finish
	Ballast					W =	White
						B = Black
						S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 050108

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031