| Supplementary Installation Instructions | |
| Sheet 1 of 1 | |
Torque Sequence and Visor attachment | Warning: Before starting any work ensure |
|
that all sources of power are turned off. All | ||
for all XL Fixtures | work must meet local/national codes and be | |
performed by a certified electrician. Do not | ||
| mount fixtures vertically. | |
Torque Sequence and Specifications
10
2
8
6
4
9
3
5
7
1
1.To remove door, loosen all ten captive door screws and carefully remove door.
2.To seal door, tighten each door screw in the order specified above.
3.Using torque allen driver, and beginning with screw one, tighten screws to five(5) inch pounds of torque.
4.Next, tighten second screw to five(5) inch pounds of torque.
5.Continue through all screws, following the above sequence, tightening each door screw to five(5) inch pounds of torque.
6.Repeat sequence tightening all screws to final then(10) inch pounds of torque.
Securing Visor to XL Fixture
10-32 x1/2"
Pan head screws (4x)
THRU hole for captive door screw (x7)
1.To secure visor to any XL fixture, slip visor over previously tightened captive door screws.
2.Secure visor using all four(4)
ADY080875 REV A(ECN080377)
