Cooper Lighting manual Tru Tribute, C O M P L I A N T, D A R K S K Y, 70-400W MH/HPS/SMH

TRU TRIBUTE	70-400WMH/HPS/SMH
AREA LUMINAIRE

D A R K S K Y

C O M P L I A N T

STREETWORKS IP55 RATING

FCO

Full Cutoff

22" 8"

[559mm][203mm]

6 1/2"

[165mm]

15 1/2" [394mm]

CONSTRUCTION

Rugged one piece die cast aluminum housing and door frame. One piece silicone gasket protects the optical chamber from performance degrading contaminants. One (1) stainless spring latch and two (2) stainless steel hinges allow toolless opening and removal of door frame.

REFLECTOR

Choice of nine (9) high efficiency optical distributions, including five (5) segmented optical systems constructed of premium 95% reflective anodized aluminum sheet. Optical segments are rigidly mounted inside a thick gauge aluminum housing for superior protection. All segment faces are clean of rivet heads, tabs or other means

ORDERING INFORMATION

SAMPLE NUMBER: TRU40MWWSLAP

PRODUCT FAMILY 1	LAMP WATTAGE 2	LAMP TYPE	BALLAST TYPE	VOLTAGE	DISTRIBUTION	OPTIONS +
TRU=Tribute	70=70W	S=HPS	H=Reac./HPF	2=120V	2F=Type II Formed	ACCESSORIES
(Arm Included)	10=100W	R=SMH	N=Hi. Reac./NPF	0=208V	2S=Type II Segmented	(See Below)
	15=150W	M=MH	P=Hi. Reac./HPF	4=240V	3F=Type III Formed
	17=175W		R=Reac./NPF	7=277V	3S=Type III Segmented
	20=200W		W=CWA	8=480V	4F=Type IV Formed
	25=250W		C=CWI	9=347V	4S=Type IV Segmented
	40=400W 3		K=10KV CWA	W=Multi-Tap wired 120V	5F=Type V Formed
	24=250/400W wired 250W			N=Multi-Tap wired 277V	5S=Type V Segmented
	42=250/400W wired 400W				SL=Spill Light Eliminator

OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]

of attachment which may cause streaking in the light distribution. Optical modules are field rotatable in 90° increments and offered standard with mogul base lampholders for 150 400W assemblies or medium base lampholders for 100W and below.

ELECTRICAL

Ballast and related electrical componentry are hard mounted to die cast housing for optimal heat transfer and operating efficiency. Optional swing down galvanized steel power tray with integral handle and quick disconnects allows tray to be completely removed from housing providing ample room for fixture installation and maintenance.

MOUNTING

Extruded 8" aluminum arm features internal bolt guides for easy positioning of fixture during installation to pole or wall surface. Standard single carton packaging of housing, square pole arm and round pole adapter allow for consolidated product arrival to site. Optional internal mast arm mount accepts a 1 1/4" to 2 3/8" O.D. horizontal tenon, while 4 bolt clamping mechanism secures fixture.

Cast in leveling guides provide ±5° vertical leveling adjustment.

FINISH

OPTIONS (add as suffix)

1=Single Fused, Internally Mounted

(120 or 277V) 4

2=Double Fused, Internally Mounted (208, 240 or 480V) 4

4=NEMA Twistlock Photocontrol Receptacle Q=Quartz Restrike (Hot Restrike Only) 5 EM=Quartz Restrike with Delay

(Also Strikes at Cold Start) 5 H=Plug-In Starter Receptacle

S=1 1/4"-2 3/8" Internal Mast Arm Mount TM=Trunnion Mount

PT=Electrical Power Tray WH=White BK=Black

AP=Grey

DP=Dark Platinum GM=Graphite Metallic K=Level Indicator P=Button Photocontrol B=House Side Shield 6

LA=Less Arm (Order Mounting Separately) U=U.L. Listed

ACCESSORIES (order separately/replace XX with color designation)

MA1201-XX=Direct Wall Mount Kit 1	MA1013-XX=4 @ 90° Tenon Adapter for 3 1/2"
MA1216-XX=8" Tribute Arm [EPA=0.43] 1	O.D. Tenon
(Includes Round Pole Adapter)	MA1014-XX=2 @ 90° Tenon Adapter for 3 1/2"
MA1218-XX=Direct Mount for Pole 1	O.D. Tenon
MA1219-XX=Wall Bracket with 8" Arm 1	MA1015-XX=2 @ 120° Tenon Adapter for 3 1/2"
OA1090-XX=Adjustable Slipfitter Arm for Tenon	O.D. Tenon
Mount 2 3/8" O.D. 1	MA1016-XX=3 @ 90° Tenon Adapter for 3 1/2"
TR/VS=Field Installed Vandal Shield 7	O.D. Tenon
MA1221-XX=External House Side Shield Kit	MA1017-XX=Single Tenon Adapter for 2 3/8"
[EPA=0.38]	O.D. Tenon
MA1222=Internal House Side Shield Kit for	MA1018-XX=2 @ 180° Tenon Adapter for 2 3/8"
2S/3S	O.D. Tenon
MA1223=Internal House Side Shield Kit for 4S	MA1019-XX=3 @ 120° Tenon Adapter for 2 3/8"
MA1224=Internal House Side Shield Kit for	O.D. Tenon
2F/3F	MA1045-XX=4 @ 90° Tenon Adapter for 2 3/8"
MA1225=Internal House Side Shield Kit for 4F	O.D. Tenon
OA/RA1016=Photoelectric Control 105-285V	MA1048-XX=2 @ 90° Tenon Adapter for 2 3/8"
NEMA Type	O.D. Tenon
OA/RA1027=Photoelectric Control 480V	MA1049-XX=3 @ 90° Tenon Adapter for 2 3/8"
NEMA Type	O.D. Tenon
OA/RA1201=Photoelectric Control 347V
NEMA Type
OA/RA1013=Shorting Cap
MA1010-XX=Single Tenon Adapter for 3 1/2"
O.D. Tenon
MA1011-XX=2 @ 180° Tenon Adapter for 3 1/2"
O.D. Tenon
MA1012-XX=3 @ 120° Tenon Adapter for 3 1/2"
O.D. Tenon

Housing and arm finished in a 5 stage premium TGIC bronze polyester powder coat paint.

Optional colors include black, grey, white, dark platinum and graphite metallic. RAL and custom color matches available.

EPA

Effective Projected Area (Sq. Ft):

1.19 (Without Arm)

LAMP TYPE	WATTAGE
Metal Halide	70, 100, 175, 250, 400W
High Pressure Sodium	70, 100, 150, 250, 400W
Super Metal Halide	175, 250, 400W

SHIPPING DATA Approximate Net Weight: 39 lbs. (17.73 kgs.)

NOTES: 1 8" arm and round pole adapter included with fixture. Specify Less Arm “LA” option when mounting accessory is ordered separately. 2 Standard with mogul base socket for 150 400W and medium base socket for 100W and below. 3 Requires reduced envelope lamp. 4 Must specify voltage. 5 Quartz options not available with SL optics. 6 House side shield not available on 5S, 5F and SL optics. 7 Not available with SLE or House Side Shield. 8 Specifications and dimensions subject to change without notice.