Corinex Global AV200 - page 42

40
Network Configuration
Corinex AV200 Powerline Ethernet Adapter
When to use this filter:
• When you want to isolate a Powerline test network from the rest of the
electrical grid, either because you don’t want the Powerline signal from the
test network to go out and disrupt other adapters, or because you want to
isolate this network from the noise, or other traffic, in the rest of the electrical
grid. This setup is illustrated in the picture below.
• When you want to isolate the electrical noise produced by some household
appliance, because this noise falls in the PLC band and disrupts the signal from
the adapters. This setup is illustrated in the picture below.
Prefilter
Power strip
PLC domain
No PLC signal on this side
No noise on this side
Corinex AV200 Powerline
Ethernet Adapter
Corinex AV200 Powerline
Ethernet Adapter
N
oisy Appliance
PLC Communication
Corinex AV200 Powerline
Ethernet Adapter
Corinex AV200 Powerline
Ethernet Adapter