Cornelius 629080214, 629085101 installation instructions Name, ED2XX DUAL-MOUNTINGKIT, Parts List

IMI CORNELIUS INC

One Cornelius Place

Anoka MN 55303--6234

Telephone (800) 238--3600

Facsimile (612) 422--3246

FOR

ED2XX DUAL-MOUNTING KIT

	DISPENSER MODEL			KIT PART NUMBER
		ED200/250		629085101
			PARTS LIST
Item
No.	Part No.		Name		Qty.
1	629080214		Insulated Lower Panel, Dual		1
2	29677		Rear Mounting Plate		1
3	620023904		Front Mounting Plate (For 6 and 8 Beverage Valve Units)		1
4	32990		Wire Connectors		4
5	50904		RTV Sealant, 3--oz Tube		2
6	620013301		Drip Tray Cover, Black		1
7	620500201		Gasket		150-In
8	620914101		Installation Instructions		1
9	70555		Screw, No. 8-32 By 1 5/16-In. long		2
10	71010		Captivating Plastic Washer, No. 8		2
11	91486		Cornelius Logo		1

1.Disconnect electric power to the Ice/Beverage Units while installing the Kit.

2.Remove lower panel assembly from both Units.

3.Relocate beverage valve keyswitch to right side of the beverage panel on one of the Units. This Unit will be positioned on the right side of the counter.

A.Remove beverage panel access covers.

B.Locate black and red wires of the keyswitch. Cut these wires approximately 2-inches from the crimp nut connection to the yellow wires.

C.Loosen the keyswitch mounting nut and remove the keyswitch. Using a 7/8-inch deep socket will help access the nut.

D.Remove plastic plug from right side of the beverage panel and insert into the left side keyswitch opening.

E.Install keyswitch into the right side of the beverage panel and tighten mounting nut.

E IMI Cornelius Inc; 1998	Rev A	December 9, 1998
		620914101