Cornelius 629087401 installation instructions Installation Procedure For Floor Drains With Funnels

4.Place each drain line a minimum of 2--inches up from the wire form feet and tighten each clamp bolt in place to firmly secure the drin line(s) in place. The collar is omitted for clarity.

5.Check for kinks and eliminate them. If necessary, add appropriate size 45°barb to barb connectors.

INSTALLATION PROCEDURE FOR FLOOR DRAINS WITH FUNNELS

6.Mount the wire form support in the center of the floor drain funnel and clamp it’s four legs of the support onto the drain funnel securely. If necessary, reform the legs to fit and attach firmly to the drain funnel.

7.The funnel takes the place of the plastic splashguard collar. The collar is unnecessary and can be discarded.

8.The adjustable clamps will accomodate 1/2--inch,

3/4--inch, and 1--inch I.D. either soft or ridgid (hard) PVC tubing. Squeezing the two tabs together that are located on the clamp--locking collar will loosen a tightened clamp.

9.Place each drain line 2--inches up from the top of the funnel and tighten each clamp bolt in place to firmly secure the drain line(s) in place.

10.Check for kinks and eliminate them. If necessary, add appropriate size 45°barb to barb connector(s).

620918801 2