ColdFusion Icemaker Adapter Kit Installation Instructions
INSTALLATION INSTRUCTIONS
FOR ADAPTER KIT P/N 629096828
This adapter kit is recommended for use with Cold Fusion Dispensers and Icemakers that measure 30" wide X 24.5" deep. The icemaker drop zone and bin stat must fit within the footprint shown in figure 1.
1.67”
21.50”
30.30”
(BACK SIDE OF DISPENSER)
27.40” 
ICE MAKER DROP ZONE AND BIN STAT MUST FIT WITHIN THE
27.40 X 21.50” OPENING
Figure 1
!WARNING:
Disconnect power to the unit before installing adaptor following all lock out / tag out procedures established by the user. Verify all of the power is off to the unit before performing any work. Failure to comply could result in serious injury, death or damage to the equipment.
!WARNING:
All of the attachment screws and plates must be installed as directed in this manual. Failure to comply could result in serious Injury, Death or Damage to the equipment.
Release Date: October 8, 2008 | www.cornelius.com | Revision: B |
© | 1 of 4 | Publication Number: 629096828INS |
