Cornelius P/N 6290889675, P/N 629088673 installation instructions Installation Instructions

FlavorFusion Icemaker Adaptor Kit Installation Instructions

INSTALLATION INSTRUCTIONS

FLAVORFUSION ICEMAKER ADAPTOR KIT FOR P/N 629088673,

629088674, 6290889675, AND 629088676

1.Place ice slide into ice drop opening in bin (see FIGURE 2).

2.Place bar into first set of pockets inside the ice bin.

3.Place Icemaker Adaptor Kit on top of unit.

4.Place icemaker on top of kit. DO NOT slide icemaker into position on the lid.

5.Apply continuous bead of NSF international (NSF) listed silastic sealant (Dow 732 or equivalent),

supplied in kit, to seal the icemaker to the top of the adapter kit. All excess sealant must be wiped away immediately.

6.Drill 9/64” diameter holes, using one of the two supplied brackets as a template, into the rear of the icemaker and the rear of the icemaker adapter kit. USE EXTREME CARE NOT TO DRILL INTO ANY ICEMAKER COMPONENTS!!! Secure the icemaker to the adapter using the screws and brackets provided.

7.For optimal performance, do not fill the ice bin more than 2/3 capacity (maximum fill is 4” below the top of bin).

Icemaker

Adaptor

Kit

Bar

FIGURE 1

Ice Slide

FIGURE 2

Revision Date: January 27, 2006	www.cornelius.com	Revision: B
© 2005-2006, IMI Cornelius Inc.	- 1 -	Publication Number: 629088673INS