Note: Bin thermostat must not interfere with agitator rotation.
6. Place the lid (item 4) in position over the stainless steel flange and install the thumb screw (item 7).
Note: The back of the ice maker must be flush with the back of the lid (item 1).
DRILL 9/64 (.140 « ) HOLES USING BOTTOM OF SLOTTED HOLES AS A TEMPLATE.
DETAIL ”A”
ENLARGED
SEAL ICE MAKER TO
ITEM 1 WITH ITEM 3
14 1/2 INCH
8
6
9
4
2
5
3
1
DETAIL ”A”
June, 1998 | 2 |
|
Rev A | 620911301 |