Cortelco 1203 warranty Operations, To store a number to memory, To dial a number stored in memory

2OPERATIONS

1.Dial mode switch

This switch is located on the bottom of the telephone. For Tone Dialing, set the switch to the T position. For Pulse Dialing, set the switch to the P position.

2. Redial function

This feature allows you to redial the last phone number dialed. a. Lift handset.

b. Press REDIAL.

3. Mute function

This feature allows you to turn off your telephone's microphone so that the other party cannot hear you.

4. Flash button

Press FLASH instead of pressing the hook switch to activate services such as Call Waiting or 3-Way Calling, or to activate certain PBX or Centrex features. You may be required to press other buttons before or after you press FLASH. Refer to the custom calling instructions provided by your local telephone company or to the operating instructions provided with your PBX.

5. Flash time switch

You can adjust the flash time by using this switch located on the bottom of your phone. There are 3 levels available, 100, 300 and 600 (ms).

6. Ringer volume switch

There are 3 ringer levels (HI, LO, and OFF). These may be selected by this switch on the bottom of the telephone.

7. Speaker button

Use this button to activate the Speakerphone.

A. Turn on: Press the button. Hang up the handset if you are off hook.

B. Turn off: To end a call, press the button. To continue a call, lift the handset.

8. Volume setting

Press the VOL.+ or VOL.- buttons to adjust the receive volume during a conversation. There are 4 levels. This button controls both the speaker and handset receive levels.

9. One-touch memory

There are 12 memory locations (M1~M10, VIP1 and VIP2) .

A. To store a number to memory

1.Lift the handset.

2.Press SET.

3.Dial the number to be stored (Press PAUSE to insert a pause).

4.Press SET.

5.Press the desired Memory Button.

B. To dial a number stored in memory

1.Lift the handset.

2.Press the desired Memory Button.

10. Two-touch memory

There are 10 two-touch memory locations.

A. To store a number to memory

1.Lift the handset.

2.Press SET.

3.Dial the number to be stored (Press PAUSE to insert a pause).

4.Press SET.

5.Press the desired Memory Button (0~9).

3 4