DOOR(S) INSTALLATION
The Inglenook doors have been mounted and checked for proper fit at the factory. If the doors are removed for any reason, care must be taken in reinstalling the doors to ensure proper alignment and fit. Setting the doors is quite simple. Ensure the doors are in the fully open position and then align the female portion of the door hinge with the male portion of the fireplace hinge. Gently lower the door hinges over the fireplace hinge. Once proper seating has been accomplished, the door can be closed to check for proper fit. Follow the same procedure for the second door. The Inglenook door installation should now be complete. To remove the doors, simply lift up a door from the fireplace hinges. Store both doors in a secure place. If the doors are left sitting, ensure that the doors cannot fall and injure someone or damage the door or glass by falling over. The Inglenook doors have been adjusted at the Country Flame factory. If the door fit is not satisfactory, the owner can adjust the doors using the hinge screws, refer to Figure 7.
FIGURE 7: DOOR ALIGNMENT POINTS
DOOR(S) ADJUSTMENT
The Inglenook doors, if installed and shipped with the fireplace, may require fine adjustment due to shipping vibrations and jarring. After extended use, the door may also require some minor adjustments to maintain a
GLASS REPLACEMENT
The glass used in the Inglenook Fireplace is a 1400 degree Fahrenheit (° F) high temperature ceramic glass. If the glass should crack or break for any reason, it must be replaced with an equal or better grade ceramic glass. The use of tempered glass or ordinary glass IS NOT AUTHORIZED and is
Version: 7.0 | 18 |