SECTION IV - CHIPPING

THIS CHIPPER WAS DESIGNED FOR CHIPPING LIMBS OR BRANCHES. NEVER USE THIS MACHINE FOR ANY OTHER PURPOSE AS IT COULD CAUSE SERIOUS INJURY.

SAFETY FIRST

•Always wear protective gloves and safety glasses during operation of the chipper.

•Never allow your hands or any part of your body or clothing inside the chipper hopper or discharge area of the chipper.

•Keep all protective guards and warning labels on the machine and in good working condition.

•Always stand clear of the discharge area when the chipper is running.

•Keep your face and body back from the chipper hopper to avoid being struck by any material that may bounce back.

•Keep proper balance and footing while operating the chipper.

•If it becomes necessary to push material into the chipper hopper, only use a wood stick, never your hands or anything steel.

•Never assume you know where the chipper knife is. You do not know where it is.

•Keep area of discharge clear of people, animals, buildings, glass or anything else that will obstruct clear discharge, cause injury or damage. Wind can also change discharge direction, so be aware.

•Always keep hands out of the chipper hopper.

•Never operate the chipper without the chipper hopper in place.

•Do not transport the chipper while the engine is running.

•Do not refuel the engine while it is hot, warm, or running.

•Do not cover the chipper while the muffler is still hot.

PROCESSING LIMBS OR BRANCHES

•Your chipper can process dry or green material.

•Remove side limbs, branches or twigs from main branch.

•Feed branch into chipper hopper.

•Keep branch at same angle as chipper hopper.

•As the branch becomes short and is inside the chipper hopper, finish processing it by pushing it into the chipper with the next branch.

•If branches are 2” or larger in diameter, feed only one branch at a time into the chipper.

•If branches are smaller than 2”, more than one at a time can be fed into the chipper.

•Green branches process quicker and easier than dry branches.

•Soft wood processes easier than hard wood.

•When chipping branches, sometimes a tail will be left at the end of the branch (usually green wood) that will increase in length as you chip. To avoid this, rotate or twist the branch as you feed it into the chute.

•Rotating the branch as you feed it into the machine will improve chipping performance.

18

Page 17 Page 19
Page 18
Image 18
Country Home Products TLC18-CHP instruction manual Safety First, Processing Limbs or Branches
Page 17 Page 19

TLC18-CHP specifications

Country Home Products has established itself as a leader in the outdoor power equipment industry, and one of its standout offerings is the TLC18-CHP, a versatile and powerful tiller designed for home gardeners and professional landscapers alike. The TLC18-CHP is engineered with cutting-edge technology and features that make soil preparation easier and more efficient.

At the heart of the TLC18-CHP is a robust engine that provides reliable power for tilling. With a powerful 6.5 horsepower engine, this tiller can easily break up the toughest soil and manage weeds effectively. The engine is designed for optimal fuel efficiency, ensuring that users can till larger areas without the need for frequent refueling.

One of the most notable features of the TLC18-CHP is its innovative dual-tine design. This design not only improves the tilling depth but also enhances the overall efficiency of the tilling process. The heavy-duty tines are capable of penetrating hard soil, ensuring that users can create a well-aerated and nutrient-rich seedbed. The variable tilling width allows for personalized control, making it versatile enough for gardens of all sizes.

The tiller is equipped with an easy-to-use throttle control and a user-friendly handle that can be adjusted for height, allowing for comfortable operation regardless of the user's stature. This ergonomic design reduces fatigue during extended use, making it ideal for large gardening projects.

Safety has not been overlooked in the TLC18-CHP's design. It features safety shields and reinforced components to protect the operator during use. The inclusion of a reliable anti-vibration system minimizes hand and arm discomfort, offering an enhanced user experience over prolonged periods.

Another important aspect of the TLC18-CHP is its durability. Constructed with high-quality materials, it is designed to withstand harsh outdoor conditions. The easy-to-maintain components ensure that users can spend more time working in their gardens and less time worrying about equipment maintenance.

In summary, the Country Home Products TLC18-CHP is a powerful, versatile, and user-friendly tiller that meets the needs of both amateur gardeners and professionals. With its advanced technologies, ergonomic design, and robust construction, it is indeed a valuable addition to any outdoor equipment arsenal, promising to make tilling tasks more efficient and enjoyable.
Top Page Image Contents