CONTROLS, INDICATORS, and Terminals, Front Panel

CONTROLS, INDICATORS, AND TERMINALS

FRONT PANEL

SPKR LEVEL	INPUT OUTPUT	SENS	MODE	FREQ
	R
	MIN	MAX	HPF OFF LPF	80 120
	L

	Figure 1: Front Panel Terminals and Controls
1. FILTER MODE SELECT SWITCH (MODE)
"HPF":	Slide switch to this position if the amplifier is used as a mid/tweeter amplifier.
"OFF":	Slide switch to this position if the amplifier is used as a full-range amplifier.
"LPF":	Slide switch to this position if the amplifier is used as a subwoofer amplifier.

2.HIGH-PASS / LOW-PASS FREQUENCY SELECTOR (FREQ) Select high-pass or low-pass crossover frequency: 80 or 120Hz.

3.INPUT SENSITIVITY LEVEL CONTROL (SENS)

The input sensitivity level can be varied from 5.0 volts to 100 mV depending on the output voltage of the source unit (refer to sub-section titled INPUT SENSITIVITY ADJUSTMENT).

4.HIGH IMPEDANCE INPUT (RCA)

To be connected to RCA pre-amp outputs from a source unit (i.e., radio, tape deck or CD player).

5.LOW IMPEDANCE INPUT (SPKR LEVEL)

To be connected to speaker outputs from a source unit (i.e. radio, tape deck or CD player) when RCA outputs are not available.

6.LINE LEVEL OUTPUT

This output can be used to connect to another amplifier for system expansion. Note: This line level output is full range.

www.coustic.com

		REAR PANEL
9 10	8	7	11				12
		PWR / PRT
			FUSE	+	L	-	+	R	-
GRD REM	B+			+	L	-	+	R	-
GRD REM	B+
						BRIDGE

Figure 2: Rear Panel Terminals and Indicators

7.POWER AND PROTECT INDICATOR (PWR/PRT) Green light indicates that the amplifier is "ON".

Red light indicates either a high current, short circuit or DC offset is detected at the speaker outputs. The amplifier will revert to normal operation once the problem is rectified.

This indicator also lights up at a high operating temperature. Under this condition, the ampli- fier will automatically shut down. As soon as the temperature falls to a safe level, the amplifi- er will automatically resume operation.

8.POWER INPUT TERMINAL (B+)

To be connected to the positive terminal of the vehicle’s battery or other constant +12 V source.

9.GROUND INPUT TERMINAL (GND)

To be wired to the vehicle’s chassis for ground.

10.REMOTE TURN-ON INPUT TERMINAL (REM)

To be connected to the remote control wire or power antenna lead of the source unit for remote ON/OFF.

11.FUSE RECEPTACLE

12.LEFT/RIGHT SPEAKER OUTPUT TERMINAL For connection to the speaker system.

4	5

160SE specifications

The Coustic 160SE is a powerful and versatile audio amplifier that has gained popularity among audio enthusiasts and professionals alike. Designed to offer superior sound quality and robust performance, the 160SE is well-suited for various applications, ranging from home theater setups to professional sound reinforcement.

One of the standout features of the Coustic 160SE is its impressive power output. Capable of delivering up to 160 watts per channel into 4 ohms, this amplifier ensures that users can enjoy rich and dynamic audio reproduction. This level of power provides ample headroom, enabling the 160SE to handle demanding soundtracks and intricate audio with ease. The amplifier's low total harmonic distortion (THD) rating guarantees that the audio remains clean and undistorted even at high volumes.

The 160SE employs advanced circuit design and high-quality components to maximize its performance. The use of high-grade capacitors and inductors contributes to improved efficiency and sound clarity. Additionally, the unit features a built-in thermal protection system that safeguards the amplifier from overheating, ensuring long-lasting operation and reliability.

One of the key technologies present in the Coustic 160SE is its class AB amplification. This design combines the best aspects of class A and class B amplifiers, resulting in improved linearity and reduced distortion while maintaining efficiency. Users will appreciate the warm and natural sound signature that is characteristic of class A/B designs. The amplifier also includes variable crossover controls, allowing users to tailor the sound to best fit their specific audio needs.

The Coustic 160SE is equipped with multiple input options, including both low-level RCA inputs and high-level (speaker wire) inputs, making it compatible with a wide range of audio sources. The rear panel features comprehensive binding posts for easy speaker connections, as well as gain controls for each channel, enabling precise level adjustments.

For those seeking an amplifier that combines power, versatility, and quality, the Coustic 160SE stands out as an excellent choice. Its robust features, coupled with its advanced technologies, ensure that it delivers a stellar audio experience for both casual listeners and audiophiles alike. Whether used in a home audio system, for live sound monitoring, or in a professional studio, the 160SE is designed to meet and exceed expectations.

Coustic 160SE owner manual CONTROLS, INDICATORS, and Terminals, Front Panel, Rear Panel

Models: 160SE