KEEP IN MIND
Connect the power.
Turn on by connecting the power plug to the electrical outlet and pressing the power selection button on the control panel. The bidet works normally only when the electricity is connected.
| This product is for 120 V~ 60 Hz only. |
Tips | Please connect the power plug to a dedicated grounded |
electrical outlet for 120 V~ 60 Hz . |
Open the main water supply valve.
The main water must be supplied to operate the bidet normally.
Check whether the product is in power saving mode before use.
- When there isn’t a seat sensor sensing and a button operation, if you set the power saving mode.
· After passing about 1 minute : The warm water/seat temperature setting becomes as a ‘Low’ status.
· After passing about 30 minutes : The product is switched to the power saving status when the indicator in the control panel is putted out.
-In the power saving mode, the power indicator is turned off. Press any button to switch the product to the waiting mode and then use the bidet.
-If the power indicator is not turned on when a button is pressed on the control panel, as the power is turned off, please turn on the power before use.
For Information PARTS NAME / KEEP IN MIND
11
