14
COWON D2
COWON D2
15
Basic Operations
6. FM Radio Mode
Checks status of stereo or mono signals
Displays the country for radio signals, which can be changed under Settings mode.
Press it briefly to change the tuning frequency at 0.1MHz intervals. Press it and hold it to searches and
jumps to the next tuning frequency with good signals.
In preset mode, it changes to either previous preset channel or the next preset channel.
Closes the settings screen
Selects the Preset mode. In this mode, only the preset channels can be accessed.
Automatically searches the FM frequencies with good signals and enters them into the preset channels
Sets stereo or mono setting
Displays the preset search mode. You can add the currently tuned frequency to the preset channel or
delete a preset channel.
Sets the quality of the recording radio signals. Higher bps provides better sound quality but requires larger file size.
Records the currently selected channel
1
2
3
4
5
6
7
10
8
9
1 2
3 3
4
4
5
6
7
8
10
9
- D2 does not have a dedicated antenna. Instead the headphone wire is used to enhance radio signal
strengths like an antenna. Stretching out the headphone wire will improve signal reception quality. During
Radio recording, be sure to use the headphone to optimize sound quality.
5. Picture and Text Mode
Open images and text files by touching the screen
Images should be placed in PICTURE folder, text files in TEXT folder
Please refer to the list of supported file types for images and texts.
Closes the settings screen
Applies the currently selected image as the background on screen
Displays the image files in the selected folder in slideshow
Moves the cursor up.
Opens the currently selected folder or file
Moves up in a folder level.
Moves the cursor down.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
Basic Operations
7. Record Mode
Plays back recorded files
Starts recording
Closes the setting screen
Records voice
Records through a Line-In connection
Selects the sound quality of the recording. Higher bps provides better sound quality but requires
larger file size.
Sets the volume level during recording.
Sets use of external microphone. Only stereo pin microphone should be used. (This setting can be
selected on in Voice Record mode)
Sets the duration for silent intervals before it creates a new file for recording. It automatically detects
the silent intervals in incoming sound and creates a new file when the silent interval exceeds the
specified duration. (*This setting can be selected only in Line-In Record mode)
1
2
3
4
5
6
7
8
9
1 2
3
4
5
6
7
8
9
3
Line-In record
※ Line-in Cable, Line-in Cable Converter (Optional)
Rec via external microphone
※ Line-in Cable Converter (Optional)