TECHNICAL INFORMATION FOR THE MBR1000
Setting WiFi Security on your CradlePoint RouterWiFi security is highly recommended by CradlePoint. WiFi Security is separate from the User Login Page. Setting “WiFi Security” on your router prevents users from connecting their computers to your router unless they have your wireless security password.
Follow The Steps Below To Set The WiFi Security:1)Access your router administration page by opening your browser and typing http://192.168.0.1 in the address bar.
2)Enter your DEFAULT ADMINISTRATIVE PASSWORD. This password is the last six digits of the MAC address found on the label on the bottom of your router.
3)Once you are connected, click on the BASIC tab, click SETUP WIZARD, click NEXT.
4)You will see a summary of the upcoming Setup Wizard Steps, click NEXT.
5)The default Administrative password should appear. Select your TIME ZONE, click NEXT.
6)One option to establish network security is by selecting REQUIRE USER
7)The next option is to select an appropriate LEVEL OF WIFI SECURITY. This will allow you to create an encrypted security key for your network based on the security mode you select. Choose the security mode that best fits your needs: GOOD for WEP, BETTER for WPA and
BEST for WPA2. (Make sure your PC or other devices support the mode you choose.) Choose a personalized SECURITY PASSWORD. This password will be used to
9)Record the setup information shown on the final summary page, then click CONNECT. This will save your new settings and apply them to your router. If you are using WiFi, you will need to
You’ve now secured your CradlePoint router from unintended WiFi access.
1)If your USB data modem or phone is not working with the router, check the list of supported devices to ensure you are using a supported device and carrier. The device you’re using must be supported on the carrier network providing your cellular service or it’s considered an unsupported device, even if it is supported on another carrier’s network.
CradlePoint’s supported device list changes regularly. We update our supported device list after a device is certified and approved. If the device you have is NOT on the list, that means we do not support it at this time.
The SUPPORTED DEVICE list can be found at: cradlepoint.com/support/MBR1000
2)Sometimes a USB data modem needs to be updated or have other configurations set correctly in order to make a connection through the router. If your USB Modem has not been updated recently, it is recommended that you do so if it is having trouble connecting to the MBR1000. Simply insert your USB data modem into your PC and using the software provided by your cellular carrier, access the Internet. Follow the directions provided to complete the update. Once you have updated your USB data modem, reconnect the cellular device to your CradlePoint router and connect to the Internet.
If, after following the above directions, you are still unable to access the Internet, contact CradlePoint Technical Support for further assistance.
The status LEDs of your router will give you an indication whether or not a proper connection is being made. See the LED STATUS definitions below:
The MBR1000 must be powered using an approved power adapter.
Green The MBR1000 is powered on.
No Light The MBR1000 is not connected to power. Check that the unit is connected to an outlet.
When your MBR1000 is up and running, it creates a shareable wireless signal (WLAN).
Green The Wireless LAN is active and available to share.
No Light The Wireless LAN is not active.
You may connect the MBR1000 via an Ethernet cable to your Cable or DSL Modem.
Green Connected to an active Ethernet Connection.
No Light Not connected to Ethernet, the connection is not configured correctly, or Cable or DSL modem is not configured correctly (or turned on).
The MBR1000 works with USB, ExpressCard, or PC Card Mobile Broadband Modems with active data plans.
Green Data connection has been established with your cellular network.
No Light Cellular network is unavailable or connection is still in progress.
Standard connection time is
If the USB Data Modem LEDs are not illuminated, your modem is not connected and online. You may need to update firmware. Refer to “Your USB Modem or Phone Does Not Work With The Router.” If, after updating, you are still not online, call CradlePoint Technical Support for further assistance.
Some electronic devices may experience problems handling the Internet Access User Login setting. Devices that commonly have trouble are, but not limited to:
• | iPod Touch | • | Wireless Printers |
• | iPhone | • | most |
•Wireless VoIP Phones • most
To Allow These Devices Access, follow the instructions below to disable the user login.
1)Access your router administration page by opening your browser and typing http://192.168.0.1 in the address bar.
2)Go to the TOOLS tab on the top navigation, then the USER LOGIN menu on the left panel.
3)Uncheck the REQUIRE USER LOGIN check box.
4)Scroll to the top of the page and click SAVE THE SETTINGS, which will save and reboot the router with your new configuration.
Note: Because the User Login page adds security and access control to others connected to your router, you may need to enable additional security features such as WEP, WPA, or MAC Address Filtering (if you are not already doing so) when turning off the User Login Page. See the “Setting WiFi Security on your CradlePoint Router” section of this guide for details.
To support the latest features, modems, and phones, follow the directions below:
1)Access your router administration page by opening your browser and typing http://192.168.0.1 in the address bar.
2)Select the TOOLS tab on the top navigation, then the FIRMWARE menu on the left.
3)Select
If you experience problems, you can also install the firmware manually.
1)Download the new firmware by going to cradlepoint.com/support/MBR1000.
2)Select the TOOLS tab on the top navigation, then the FIRMWARE menu on the left.
3)In the FIRMWARE UPGRADE section, click BROWSE.4)Browse for the new firmware file you downloaded in Step 1 and click OPEN.
5)Click the UPLOAD button. The upgrade process can take a minute or two.
DO NOT TURN OFF OR UNPLUG THE DEVICE WHILE IT IS UPGRADING!StillÊ HaveÊ Questions??
visitcradlepoint.com/knowledge-base
or
EMAIL support@cradlepoint.com
CHAT cradlepoint.com/content/chat-support
CALL (208) Regulatory Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. This device must accept any interference received, including interference that may cause undesired operation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio or television technician for help.
Changes or modifications not expressly approved by CradlePoint, Inc. could void the user’s authority to operate the product.
Radio Frequency Interference Requirement - Canada
This Class B digital apparatus complies with Canadian
Cet appareil numérique de la classe B est conforme à la norme
Warranty Information
CradlePoint, Inc. warrants this product against defects in materials and workmanship to the original purchases (or the first purchaser in the case of resale by an authorized distributor) for a period of one (1) year from the date of shipment. This warranty is limited to a repair or replacement of the product, at CradlePoint’s discretion.
Within thirty (30) days of receipt should the product fail for any reason other than damage due to customer negligence, purchaser may return the product to the point of purchase for a full refund of the purchase price.
If the purchaser wishes to upgrade or convert to another CradlePoint, Inc. product within the thirty (30) day period, purchaser may return the product and apply the full purchase price toward the purchase of the other product. Any other return will be subject to CradlePoint, Inc.’s existing return policy.
