Emptying the Drum
WARNING: To reduce the risk of I
injury from accidental starting, unplug power cord before emptying the drum.
1.Remove the power head assembly of
the wet/dry vac by pulling outward on the latches located on each side of the
vac. Lift off the power head assembly.
2.Dump the drum contents into the proper waste disposal container.
Blowing Feature
Your vac contains a blowing feature. It has the capability to blow sawdust and other debris. It is excellent to use to blow dust and debris out of garages or off patios and driveways. Follow the steps below to use your vac as a blower.
1.Locate blowing port of your vac.
2.Insert one end of the 4 foot x
4.Turn vac "ON"and you are ready to use your vac as a blower.
NOTE: If you need additional length at the end of the hose, extension wands are available at Sears retail stores as stock no.
WARNING: Always wear safety goggles complying with ANSI Z87.1 when using as a blower.
WARNING: Wear a dust mask if blowing creates dust which might be inhaled.
CAUTION: To reduce the risk of hearing damage, wear ear protectors
when using the vac/blower for extended hours or when using it in a noisy area.
WARNING: To avoid injury to
bystanders, keep them clear of blowing debris.
9