SP6523-3.qxd 11/13/06 8:15 PM Page 3

•Do not use with a torn filter or without the filter installed except when vacuuming liquids as described in the operation section of this manual. Dry debris ingested by the impeller may damage the motor or be exhausted back into the air.

•Do not leave Vac plugged in. Unplug from outlet when not in use and before servicing.

•Turn off Vac before unplugging.

•To reduce the risk of injury from accidental starting, unplug power cord before changing or cleaning filter.

•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•Do not use with damaged cord, plug or other parts. If your Vac is not working as it should, has missing parts, has been dropped, damaged, left outdoors, or dropped into water, return it to a Sears Service Center.

•Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp edges or corners. Do not run Vac over cord. Keep cord away from heated surfaces.

•Do not handle plug, switch, or the Vac with wet hands.

•Do not put any object into ventilation openings. Do not vacuum with any ventilation openings blocked; keep free of dust, lint, hair or anything that may reduce air flow.

•Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

•To reduce the risk of falls, use extra care when cleaning on stairs.

•To reduce the risk of personal injury or damage to Vac, use only Craftsman recommended accessories.

•When using as a blower:

-Direct air discharge only at work area.

-Turn unit off before setting on ground or releasing grasp from handle.

-Do not set down in liquid; electric shock could occur.

-Do not direct air at bystanders.

-Keep children away when blowing.

-Do not use blower for any job except blowing dirt and debris.

-Do not use as a sprayer.

-Wear safety eyewear.

•Connect only to a properly-grounded outlet. See grounding instructions.

WARNING: To reduce the risk of eye injury, wear safety eyewear. The operation of any utility vac or blower can result in foreign objects being blown into the eyes, which can result in severe eye damage. Always wear safety eyewear complying with ANSI Z87.1 (or in Canada CSA Z94.3) before starting operation. Everyday eyeglasses are not safety glasses and could seriously hurt you when they break.

CAUTION: To reduce the risk of hearing damage, wear ear protectors when using the vac for extended hours or when using it in a noisy area.

CAUTION: For dusty operations, wear dust mask.

NOTE: Static shocks are common in dry areas or when the relative humidity of the air is low. Vacuuming fine debris with your vac can deposit static charge on the hose or on the Vac. The best remedy to reduce the frequency of static shocks in your home or when using this Vac is to add moisture to the air with a humidifier.

WARNING: Use only extension cords that are rated for outdoor use. Extension cords in poor condition or that are too small in wire size can pose fire and shock hazards. To reduce the risk of these hazards when using an extension cord, be sure it is in good condition and that the connection does not come into contact with liquid. To keep power loss to a minimum, use the following table to choose the minimum wire size extension cord.

Extension Cord Length

Gauge A.W.G.

0-50 Ft.

14

50-100 Ft.

12

 

 

3

Page 2 Page 4
Page 3
Image 3
Craftsman 113.177135 owner manual Extension Cord Length Gauge A.W.G
Page 2 Page 4

113.177135 specifications

The Craftsman 113.177135 is a versatile and dependable table saw designed for both professionals and DIY enthusiasts alike. With its robust construction and thoughtful features, it stands out in the woodworking community as an ideal tool for precision cutting and efficient performance.

One of the standout features of the Craftsman 113.177135 is its powerful motor. Equipped with a 1.5 HP motor, this table saw offers ample power to handle a variety of materials, from softwoods to hardwoods. The motor delivers a consistent and reliable performance, allowing users to make clean and accurate cuts with ease.

The saw’s 10-inch blade is another key characteristic that enhances its cutting capabilities. It can easily perform rip cuts, cross cuts, and bevel cuts, making it a versatile addition to any workshop. The blade can be adjusted to different angles, enabling users to achieve the desired cut for various applications.

In terms of construction, the Craftsman 113.177135 features a sturdy cast iron table, which provides a stable and flat surface for accurate measurements. This durability not only enhances precision but also contributes to the longevity of the tool. Additionally, the table’s extension wings increase the working surface, allowing for larger workpieces and improved stability during cutting.

Safety is a priority in the design of the Craftsman 113.177135, and it comes equipped with various safety features. The blade guard is easily removable, ensuring that users can switch between tasks without hassle, while a riving knife minimizes the risk of kickback, a common concern with table saws.

The onboard storage is another thoughtful addition, providing a convenient place for storing accessories like the miter gauge, push stick, and wrenches. This keeps the workspace organized and ensures that essential tools are always within reach.

Overall, the Craftsman 113.177135 combines power, precision, and safety into a compact design perfect for a variety of woodworking projects. Its robust performance, durable construction, and focus on user-friendly features make it a valuable investment for anyone looking to elevate their woodworking skills, whether for professional use or personal projects.
Top Page Image Contents