ELECTRICAL
When working outdoors with a product, use an extension designated with “WA” on the cord’s jacket.
Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.
**Ampere rating (on product data plate)
Cord Length |
| Wire Size (A.W.G.) |
|
| |||
|
|
|
|
|
|
| |
| 25´ | 16 | 16 | 16 | 16 | 14 | 14 |
|
|
|
|
|
|
| |
| 50´ | 16 | 16 | 16 | 14 | 14 | 12 |
|
|
|
|
|
|
| |
100´ | 16 | 16 | 14 | 12 | 10 | — | |
|
|
|
|
|
|
|
|
**Used on 12 gauge - 20 amp circuit. NOTE: AWG = American Wire Gauge
WARNING:
Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious per - sonal injury.
WARNING:
Check extension cords before each use. If damaged replace immediately. Never useproduct with a damaged cord since touching the damaged area could cause elec- trical shock resulting in serious injury.
Input | 120 V AC 60Hz. | Replacement Spool Part Number | |
Cutting Path | 12 in. | Replacement Cutting line Part Number | |
Feed type | 0.065 in. bump & feed |
|
|
CORD RETAINER
A convenient cord retainer helps keep the extension cord connection secure during string trimmer operation.
EDGER GUIDE
The easily mounted edger guide allows the string trimmer to perform as an edger.
FRONT HANDLE
The string trimmer is equipped with a front handle assembly for ease of operation and to prevent loss of control.
GRASS DEFLECTOR
The trimmer includes a grass deflecter that helps protect from flying debris.
ROTATING REAR HANDLE
The rotating rear handle on the string trimmer can be locked in two different positions for ease of use when edging.
TELESCOPING BOOM
The string trimmer can be adjusted to different extension points for ease of use.
