SAFETY INSTRUCTIONS cont.
!WARNING: Some dust created by using power tools contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are:
•Lead from
•Crystalline silica from bricks and cement and other masonry products.
•Arsenic and chromium, from chemically treated lumber.
Your risk from these exposures varies, depending upon how often you do this type of work. To reduce your exposure to these chemicals:
•Work in a
•Work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
!WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.
ADDITIONAL RULES FOR SAFE OPERATION
!WARNING: BE SURE to read and understand all instructions.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
SAFETY INSTRUCTIONS cont.
ADDITIONAL RULES FOR SAFE OPERATION cont.
8.SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who may use this tool. If someone borrows this tool, make sure they have these instructions also.
UNPACKING
1.Remove the Planer from the Storage / Carrying Case and inspect it carefully to make sure that no breakage or damage has occurred during shipping.
2.Do not discard any of the packing materials until all parts are accounted for.
3.The planer has a Crescent Wrench
4.The Edge Guide is
5.Also included with your planer and force fitted into the Storage / Carrying Case is a
Rabbet Guide.
6.Two blades are included with your planer.
7.If any of the parts are damaged or missing (refer to PARTS LIST below), return the planer to your nearest Sears store or Craftsman outlet to have the planer replaced.
!WARNING: If any parts are missing, DO NOT operate this planer until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
PARTS LIST
1. Planer
1. | Know your power tool. Read operator’s manual carefully. Learn the applications and |
| limitations, as well as the specific potential hazards related to this tool. Following this rule |
| will reduce the risk of electric shock, fire or serious injury. |
2. | ALWAYS wear safety glasses or eye shields when using this planer. Everyday |
| eyeglasses have only |
3. | PROTECT your lungs. Wear a face mask or dust mask if the operation is dusty. |
4. | PROTECT your hearing. Wear appropriate personal hearing protection during use. |
| Under some conditions noise from this product may contribute to hearing loss |
5. | ALL VISTORS AND BYSTANDERS MUST wear the same safety equipment that the |
| operator of the planer wears. |
6. | INSPECT the tool cords periodically and if damaged have them repaired |
| at your nearest Sears Service Center. ALWAYS BE AWARE of the cord location |
| when operating your planer. |
7. ALWAYS check the tool for damaged parts. Before further use of the tool, | |
| a guard or other part that is damaged should be carefully checked to |
2. Edge Guide
| mm |
| 0 |
Inches |
|
0 | 10 |
112 | 20 |
1 |
|
3.Rabbet Guide
5.Two Blades
0
3/64
1/32 
1/64
determine if it will operate properly and perform its intended function. Check |
for misalignment or binding of moving parts, breakage of parts, and any other |
condition that may affect the tool’s operation. A guard or other part that is |
damaged should be properly repaired or replaced at a Sears Service center. |
8
4. Wrench | 6. Two Screws |
7. Storage / Carrying Case
8. Operator’s Manual
9
