Craftsman 315.10899 Replaced. Failure to do so could result in possible, Serious personal injury

Horsepower			2-1/4	Cutting	Depth	at 45 ° Bevel Cut	1-13/16	in. (46	mm)
Input		12 Amperes		Cutting	Depth	at 51.5 ° Bevel Cut	1-5/8 in. (41		mm)
Blade	Diameter	7-1/4 in. (184	mm)	Rating			120 volts,	60 Hz, AC
Blade Arbor
		518 in. (16	mm)	No Load Speed				5,000 RPM
Cutting	Depth at 0° Bevel Cut	2-3/8 in. (60	mm)

Your circular saw has been shipped completely	_	WARNING: If any parts are missing, do not
assembled except for the blade. Inspect it carefully to
		operate this tool until the missing parts are
make sure no breakage or damage has occurred
		replaced. Failure to do so could result in possible
during shipping. If any parts are damaged or missing,
		serious personal injury.
contact your nearest Sears Retail Store to obtain
replacement parts before attempting to operate saw. A
blade, blade wrench, and this owner's manual are also
included.

The following 7-1/4 in. 7-1/4 in. 7-1/4 in. 7-1/4 in. 7-1/4 in. 7-1/4 in. 7-1/4 in.

recommended accessories are currently available at Sears Retail Stores. 40 Tooth General Purpose Cut-OffBlade

35 Tooth Master Combination Blade

200 Tooth Plywood Blade

18 Tooth Carbide Blade

18 Tooth Mach II Silver Series Carbide Blade

24 Tooth Mach II Silver Series Carbide Blade

24 Tooth Combination Carbide Blade

Rip Guide

,_ WARNING: The use of attachments or accessories not listed might be hazardous.

8