•If this system is used with other dust collectors, the dust collector must be rated at least 3W' (of water) static pressure and 150 cfm at 2W' diameter. A reducer may be needed.
•This system is not intended to be used with a wet/dry vac.
DANGER:Do not use this dust collection system in a
flammable or explosive atmosphere. Do not use to collect metal shavings or dust Consult National Fire Protection
Association (NFPA) standards before setting up a dust collec- tion system, especially NFPA 664.
WARNING: | Do not connect to dust collector until unit is |
completely assembled.
CAUTION: improper connection of the
•Open blast gate of machine which will be used. Close all other blast gates.
•Turn dust collector power switch to ON.
•Turn woodworking machine power switch to ON.
Refer to Figure 2.
WARNING: Turn dust collector switch off and remove plug
from power source outlet before maintaining your shop dust collection system.
Clean inside the pipes, fittings and flexible hose using a portable vacuum cleaner or manually remove large debris as needed.
Model 351.223130
Figure 2 - Replacement | Parts Illustration for | 3 |
|
Dust Collection System
8
0
7
9
7
© 25
KEY |
|
|
|
|
|
|
|
NO. | PART NO. | DESCRIPTION |
|
| QTY. | ||
1 | 23967.00 | 2_/2x | 24" | Flexible | Hose | 1 | |
2 | 23968.00 | Connector |
|
|
| 12 | |
3 | 23969.00 | 45 ° Elbow | - 2W' |
| 2 | ||
4 | 23970.00 | 2_/2x | 22" | Plastic | Straight Pipe | 4 | |
5 | 23971.00 | Hanger |
|
|
| 8 | |
6 | 23972.60 | 2V2" | Plastic "T" | Fitting | 3 | ||
7 | 23973.06 | Blast | Gate |
|
| 4 | |
8 | 23974.60 | 2_/Z'Hose | Clamp |
| 10 | ||
9 | 23975.60 | 2_/2x | 72" | Flexible | Hose | 4 | |
10 | 23976.66 | Mounting | Hardware | Kit | 1 | ||
11 | 23977.00 | Grounding | Kit |
|
| 1 | |
A | 23964.66 | ID/Warning | Label |
| 1 | ||
A | 23961.61 | Operator's | Manual |
| 1 | ||
ANot Shown
4
