damageWhenmixingfuel,follow.

instructionsprintedoncontainer.

Onceoilisaddedtogasoline,shake containermomentarilytoassurethatthe fuelisthoroughlymixedAlwaysread. andfollowthesafetyrulesrelatingto fuelbeforefuelingyourunit.

IMPORTANT Experienceindicatesthatalcohol blendedfuels(calledgasoholorusing ethanolormethanol)canattractmois- turewhichleadstoseparationand formationofacidsduringstorage. Acidicgascandamagethefuelsys- temofanenginewhileinstorageTo. avoidengineproblems,emptythefuel systembeforestoragefor30daysor longerDrainthegastank,starttheen.- gineandletitrununtilthefuellinesand carburetorareemptyUsefreshfuel. nextseasonNeveruseengineorcar.- buretorcleanerproductsinthefuel tankorpermanentdamagemayoc- curSeetheSTORAGEsectionfor. additionalinformation.

HOW TO STOP YOUR UNIT

Release the throttle trigger.

Move the ON/OFF switch to the OFF position.

o.,OFF

/41W

HOW TO START YOUR UNIT

,_WARNING:

Avoid any contact

with the muffler. A hot muffler can

cause serious

burns.

Starting position

Primer Bulb

Start

Lever

Starter Handle

5.This unit has the Sim-pul" starting system. You do not have to pull the starter rope handle sharply or brisk- ly. Pull starter rope handle with a controlled and steady motion until engine starts and runs.

6.Allow unit to run for 10-15 seconds, then fully squeeze the throttle trigger

to disengage the starting system (start lever returns to RUN position).

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Squeeze and hold the throttle trig- ger. Keep throttle trigger fully squeezed until engine runs smoothly.

3.Pull starter rope handle with a con-

trolled and steady motion while squeezing throttle trigger until en- gine starts and runs.

NOTE: Normally, the warm starting procedure can be used within 5-10 minutes after the unit is turned off. If

STARTING A COLD ENGINE

NOTE: DO NOT squeeze the throttle

trigger until the engine has started and runs.

1.Set unit on a flat surface.

2= Move ON/OFF switch to the ON position.

3= Slowly press the primer bulb 6 times.

4= Move the start lever to the START position.

the unit sits for more than 10 minutes

without being used, it will be neces- sary to start the unit by following the steps under STARTING A COLD EN- GINE or following the starting instruc- tion steps shown on the unit.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the ON/OFF switch in the ON position. Move the start lever to the RUN position and fully squeeze throttle trigger. Pull the starter handle repeat-

11

Page 11
Image 11
Craftsman 358.79105 operating instructions Instructionsprintedoncontainer

358.79105 specifications

The Craftsman 358.79105 is a powerful string trimmer designed to cater to homeowners and landscaping professionals alike. Known for its reliability and performance, this model encompasses several features and technologies that enhance functionality and ease of use, making yard maintenance tasks more efficient and enjoyable.

One of the standout features of the Craftsman 358.79105 is its robust 25cc 2-cycle engine, which provides exceptional power for tackling tough weeds, grass, and overgrowth. This engine is designed for optimum performance, ensuring that users can complete their trimming tasks quickly and efficiently. The lightweight design of the trimmer further enhances maneuverability, allowing users to operate it with minimal fatigue during extended use.

Another significant attribute of the Craftsman 358.79105 is its Easy Start technology. This feature simplifies the starting process, making it easier to get the engine running with less pulling effort. Users can appreciate this convenience, particularly when getting back to work after refueling or taking breaks.

The trimmer is equipped with a 17-inch cutting width, which strikes a balance between coverage and precision. This cutting width allows users to cover larger areas in less time while maintaining control for intricate trimming around flower beds and obstacles. The dual-line bump feed system ensures that line is fed quickly and efficiently with a simple bump on the ground, eliminating the need for manual line adjustments.

Craftsman's commitment to user comfort is evident in the design of the trimmer. It features an adjustable front handle, allowing users to customize the grip according to their height and preference. This level of personalization contributes significantly to ergonomic use, reducing strain on the arms and back during prolonged operation.

Durability is also a key characteristic of the Craftsman 358.79105. Constructed with high-quality materials, it is designed to withstand the rigors of outdoor use. The trimmer’s protective shield ensures that users are safeguarded from debris, providing an additional layer of safety.

In summary, the Craftsman 358.79105 is a well-rounded string trimmer that combines power, ease of use, and comfort. With its 25cc engine, Easy Start technology, 17-inch cutting width, dual-line bump feed, and ergonomic features, it stands out as a reliable tool for maintaining lawns and gardens of all sizes. Whether you're a seasoned professional or a weekend warrior, this trimmer is engineered to meet the demands of a variety of landscaping tasks.