5.Positionthehandlebarasshown, 6. Retightenhandlebarbyturning
ensuringthehandlebarisposi- clampknobclockwiseuntilhandle-
tionedonthehandlebarclampbe- barissecureandstationaryin tweenthearrowsonthehandlebar clamp(clampknobcannotbeover-
decal.tightened).
KNOW YOUR EDGER ATTACHMENT
READ THIS INSTRUCTIONMANUALAND SAFETY RULES BEFORE OPERATINGYOUR EDGER ATTACHMENT. Compare the illustrations with your attachment to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Hanger
Depth Adjustment Knob
Gearbox
BLADE
The BLADE is designed to cut sod.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler which enables optional attach-
ments to be installed. The optional attachments are:
Cultivator ............ 358.792410
Blower .............. 358.792421
Brushcutter .......... 358.792441
I_ WARNING: Always disconnect
powerhead spark plug (or disconnect powerhead from power source) before removing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal-
Tube
JBlade Shield
Wheel
Edger Blade
DEPTH ADJUSTMENT KNOB The DEPTH ADJUSTMENT KNOB is
usedtoa_ustthe wheel_rbladecut- tingdepth.
Upper Tube
Coupler
Lower
Attachment
TIGHTEN Knob
2.Press and hold the locking/release button.
Locking/Release Button
ling attachments, place the power- head and attachment on a flat surface
for stability.
1.Loosen the coupler by turning the knob counterclockwise.
/
Lower Attachment
Upper Tube
3. While securely holding the upper tube, pull the attachment straight out of the coupler.
7
