CUSTOMER RESPONSIBILITIES
WARNING: Disconnect the spark plug before performing maintenance,
service, or adjustments.
CARE & MAINTENANCE TASK
Check for loose fasteners and parts
Check for damaged or worn parts
Inspect and clean unit and labels Clean air filter
Replace spark plug
Replace fuel filter
Check muffler mounting screws
&WARNING: Avoid touching muf-
fler unless engine and muffler are cold. A hot muffler can cause serious burns.
_IL WARNING: Stop engine and be sure the impeller blades have stopped turning before opening the vacuum in-
let door or attempting to insert or re- move the vacuum or blower tubes.
The rotating blades can cause serious
WHEN TO PERFORM
Before each use
Before each use
After each use
Every 5 hours of operation
Yearly
Yearly
Yearly
INSPECT AND CLEAN UNIT AND LABELS
•After each use, inspect complete unit for loose or damaged parts. Clean the unit using a damp cloth with a mild detergent.
•Wipe off unit with a clean dry cloth.
CLEAN AIR FILTER
injury. Always disconnect the spark |
| Air Filter | |
plug before performing maintenance or |
| ||
)_ | Cover | ||
accessing movable parts. | |||
|
|
GENERAL RECOMMEN DATIONS
The warranty on this unit does not cov- er items that have been subjected to operator abuse or negligence. To re- ceive full value from the warranty, the operator must maintain unit as instruct- ed in this manual. Various adjustments will need to be made periodically to properly maintain your unit.
CHECK FOR LOOSE
FASTENERS AND PARTS
•Spark Plug Boot
•Air Filter
•Housing Screws
CHECK FOR DAMAGED OR WORN PARTS
Contact Sears Service Center for re-
placement of damaged or worn parts.
•Throttle Lever - Ensure throttle lever
functions properly by moving the throttle lever to the STOP position. Make sure engine stops; then restart engine and continue.
•Fuel Tank - Do not use unit if fuel tank shows signs of damage or leaks.
•Vacuum Bag - Do not use vacuum bag if it is torn or damaged.
d_'7" Air Filter | Screws |
A dirty air filter decreases engine per- formance and increases fuel consump- tion and harmful emissions. Always clean after every 5 hours of operation.
Cleaning the air filter:
1.Clean tile cover and the area
around it to keep debris from falling into the carburetor chamber when
the cover is removed.
2.Remove parts as illustrated.
NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emissions.
3.Wash the filter in soap and water.
4.Allow filter to dry.
5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.
6.Replace parts.
