TROUBLESHOOTING | CHART | |
PROBLEM |
| CAUSE |
Srass catcher | 1. | Cutting height too low. |
rmtfllllng (Ifso | 2. | L_ on blade worn off. |
aqulpped) | 3. | Catcher not venting air. |
Hard to push | ! 1. | Grass is too high or wheel |
| 2. | height is too low. |
| Rear of lawn mower | |
|
| housing or blade dragging |
| 3. | in grass. |
| Grass catcher too full. | |
| 4. | Handle height position not |
|
| dghtfor you. |
CORRECTION
1_ Raise cutting height.
2.Replace blade.
3.Clean grass catcher.
1.Raise cutting height.
2.Raise rear of lawn mower housing one (1) setting higher.
3.Empty grass catcher.
4.Adjust handle height to suit.
17