INSTALL THE WIRE HARNESS AND THE
ON/OFF SWITCH
•Slide the Wire Harness under the Cable Anchor of the Hitch Assembly.
•Connect two 1/4 Female Spade Connectors from the Wire Harness to the prongs of the ON/OFF Switch.
•Insert the Seat Switch Plug of the Wire Harness into the Hitch Assembly, Pulling it up and through the right top side of the Switch Mounting Bracket.
•Remove one Ring Nut from the ON/OFF Switch and adjust the second Ring Nut 1/4 Inch from the top of the threads.
•Insert the ON/OFF Switch up through the Switch Mounting Bracket and secure it by reinstalling the Ring Nut.
NOTE: The notch in the threads of the ON/OFF Switch | FIG. 1 |
must face toward the "ON" of the ON/OFF Switch Decal |
|
to insure proper ON/OFF control. |
|
7
