•Assemble a shoulder bolt to the bottom hole in
each side plate, securing each bolt with a 3/8" lock washer and a 3/8" hex lock nut. See figure 3.
_8" HEX LOCK NUT
3/8"LOCK
WASHER
R. H. SIDE PLATE
3/8"SHOULDER BOLT
FIGURE3
INSTRUCTIONS FOR TRACTORS WITH FOOT REST BRACKETS UNDER THE FOOT RESTS (Figure 4.)
•Remove and discard the bolt and nut from the LH. foot rest bracket and the side of the tractor frame as shown in figure 4. Repeat for the R.H. bracket. HINT: If the tractor'ssuspension arms are in the way, lower them using the attachment lift lever.
Using the now empty hole and the hole beside it, attach the L.H. Hanger Bracket (marked "L") to the inside of the tractor frame. Use two 3/8" x 1" carriage bolts, 3/8" lock washers and 3/8" hex lock nuts, making sure the bolt heads are on the inside of the tractor frame. Repeat for the R.H. side. See figure 4.
/ / | |
BOLT REMOVED | WASHER / |
- FROM THIS | / |
3/8" HEX | |
| LOCK NUT |
(_-
!I
SUSPENSION ARM
3/8" xl"
CARRIAGE
INSTRUCTIONS FOR TRACTORS NOT HAVING FOOT REST BRACKETS UNDER THE FOOT RESTS (Figure 5.)
•Locate the empty hole beneath the foot rest in the left side of the tractor frame as shown in figure 5. Attach the L.H. Hanger Bracket (marked "L') to the inside of the frame using a 3/8" x 1" carriage bolt, 3/8" lock washer and 3/8" hex lock nut. Make sure the bolt is assembled from the inside of the tractor frame. Repeat for the R.H. side.
HINT: If the tractor'ssuspension
I
3/8" x 1"
CARRIAGE L H. HANGER
BRACKET
BOLT
FIGURE5 | LEFT SIDE VIEW |
INSTRUCTIONS FOR ALL TRACTORS
•Remove and discard the bolt, washer and nut which fasten the sway bar bracket to the L.H. side of the tractor frame. Replace with a shoulder bolt and a 3/8" hex lock nut as shown in figure 6.
SHOU |
|
I |
|
BOLT REMOVED |
|
FROM THIS HOLE | " HEX |
SWAY\ | BAR /LOCK NUT |
BOLT
BRACKET
BRACKET |
FIGURE4 | LEFT SIDE VIEW |
FIGURE 6 | LEFT SIDE VIEW |
