OPERATION

HOW TO STOP THE ENGINE

To stop the engine, release the engine stop ieven If the engine continues to run, move the throttle control to the STOP position.

If the engine will not stop, hold a screwdriver against the spark plug and against the en- gine cooling fins. The spark will go to ground and the engine will stop.

HOW TO START THE ENGINE

runs, the blade will rotate. To

,_ WARNING: When the engine prevent injury, keep hands and

feet away from blade.

IMPORTANT: Before you start the engine, move the edger to the desired location. Op- erate the controls several timer. Make sure

all controls move freely.

1.Check the oil

2.Fill the fuel tank with regular unleaded gasoline. Make sure the gasoline is clean. Leaded gasoiine will increase de- posits and shorten the life of the valves.

NOTE: Do not use gasohol or methanol. Do not use premium unleaded gasoline.

_hlL ARNING: Always use a safety

gasoline container. Do not smoke when adding gasoline to

the fuel tank. When inside an enclo-

sure, do not add gasoline. Before you add gasoline, stop the engine and let the engine cool for several minutes.

3.Make sure the spark plug wire is con- nected to the spark plug.

4.Pull the engine stop lever back to the EN- GAGED position. Hold the engine stop lever against the handle.

5.Move the throttle control lever to the FAST position.

6.When starting a cold engine, push the primer button five times. Wait approxi- mately two seconds between each push. See Figure 10.

Throttle

Primer

 

Button

Figure 10

NOTE: Do not use the primer button to start a warm engine.

7.To start engine, hold the recoil starter handle firmly with your right hand.

Quickly pull the recoil starter handle. DO NOT allow the starter rope to snap back. Let the starter rope slowly rewind. If en- gine fails to start after three pulls, push primer button two times and again pull the recoil starter handle.

When the engine starts, move the throttle control lever to the FAST position. During normal use keep the throttle in the FAST position.

10.If the engine does not start in 5 or 6 tries, see the instructions in the "Trouble Shooting Chart".

NOTE: The cutting blade speed is con- trolled by the engine speed. To reduce the cutting blade speed, decrease the engine

speed. To increase the cutting blade speed, increase the engine speed.

_b WARNING: Never run the en-

gine indoors or in a poorly ven- tilated area. Engine exhaust

contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any mov-

ing parts. Avoid the muffler and sur- rounding areas. Temperatures can ex-

ceed 150 degrees.

F_001101M12

Page 12
Image 12
Craftsman 536.772101 manual HOW to Stop the Engine, HOW to Start the Engine

536.772101 specifications

The Craftsman 536.772101 stands out in the world of outdoor power equipment, particularly for homeowners seeking efficiency and reliability in snow removal. This snow thrower is designed to tackle heavy snowfall with ease, providing a robust solution for clearing driveways and walkways during winter storms.

One of the main features of the Craftsman 536.772101 is its powerful 8.5 horsepower engine, which ensures optimal performance even under challenging weather conditions. The engine is designed to deliver high torque, allowing it to move snow quickly and efficiently. With a clearing width of 24 inches and an intake height of 21 inches, this machine can handle deep and wide snow accumulations, making it suitable for various snowfall scenarios.

The snow thrower's advanced auger system is another key characteristic that enhances its performance. The auger is engineered to efficiently scoop up snow and propel it through the discharge chute. The Craftsman 536.772101 is equipped with an innovative adjustable chute, allowing users to direct the snow up to 40 feet away in the desired direction. This feature is particularly useful for homeowners who need to manage snow placement effectively without creating additional obstacles in their yard or driveway.

In terms of technology, this model includes a user-friendly, electric start option that eliminates the hassle of pull-starting in freezing temperatures. The electric start ensures that users can quickly get the snow thrower up and running, even in the coldest of conditions. Additionally, the snow thrower features a six-speed transmission, providing versatility and control depending on the severity of the snowfall.

Durability and ease of use are also integral to the Craftsman 536.772101. The heavy-duty construction materials ensure that it can withstand harsh winter conditions, while the ergonomically designed controls provide comfort during operation. The padded hand grips enhance user comfort, allowing for extended use without strain.

Overall, the Craftsman 536.772101 combines innovative features, powerful technology, and robust construction to deliver a reliable snow removal experience. With its impressive capabilities, this snow thrower is a fantastic investment for those looking to simplify their winter maintenance routine. Whether faced with light flurries or heavy winter storms, the Craftsman 536.772101 proves to be a formidable ally in keeping properties clear of snow.