Rechargeable Craftsman LED Worklight I.S. 10/5/06 9:35 AM Page 1
Maintenance
Before performing any maintenance, ALWAYS unplug worklight. Remove dirt and grime as soon as it accumulates. Use a soft, damp cloth and a mild soap, if needed. Be sure not to get the electrical plug wet. NEVER submerge any part of the worklight in any solution to clean it. DO NOT USE solvents such as gasoline, turpentine, etc. to clean unit. Aerosols and other chemicals may fog the clear polycarbonate lens.
One Year Full Warranty on Worklight
If this product fails due to a defect in material or workmanship within one year from the date of purchase, RETURN IT TO YOUR NEAREST SEARS STORE OR CRAFTSMAN OUTLET IN THE UNITED STATES, and it will be replaced free of charge. This warranty applies for only
90 days from the date of purchase if this Craftsman Worklight is used for commercial or rental purposes. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Assembly or operation questions? Call
www.craftsman.com 9/2006
Contains nickel
BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY
Printed in China
Owner’s Instructions
Caution: Read all instructions and warnings before operating.
SAVE THESE INSTRUCTIONS! READ ALL INSTRUCTIONS!
NOTE: To avoid serious injury or death from electrical shock or fire:
1.DO NOT handle this fixture or try to plug it in when your hands are wet or damp or when you are standing on a wet or damp surface or in water.
2.This fixture MUST ALWAYS BE USED in accordance with all electrical and safety codes and ordinances, including the most recent National Electric Code (NEC) and with the Occupational Safety and Health Ace (OSHA) Volume 1 on General Industry Standards and interpretations.
3.ONLY USE the UL Listed battery charger, or 12V DC plug supplied with the fixture.
4.DO NOT replace batteries.
5.DO NOT work on this battery pack