Craftsman 358.799430 Uumwaterorotherliquids. mulateandrestrictproperairflowDo, Carton Contents

• Whenusingthevacuumattachment,• Alwaysusethecollectionbagshoul- theunitisdesignedtopickupdryma- derstrapwhenvacuumingtoavoid

terialsuchasleaves,grass,small lossofcontrol. twigs,andbitsofpaperDonotvacu.- • Checkairintakeopenings,elbowtube,

umstones,gravel,metal,broken andvacuumtubesfrequently,always glass,etc.toavoidseveredamageto, withtheunitstoppedandthepower theimpellerToavoidthepossibilityof. sourcedisconnectedKeepventsand. electricalshock,donotattempttovac- tubesfreeofdebriswhichcanaccu-

uumwaterorotherliquids. mulateandrestrictproperairflowDo.

•Neverruntheunitwithouttheproper notusewithanyopeningblocked, equipmentattachedWhenusedasa. Keepfreeofdust,lint,hairandany- vacuum,alwaysinstallvacuumtubes thingthatmayreduceairflow. andcollectionbagassemblyMake. STANDARDS

surethecollectionbagassemblyis This product is listed by Underwriters completelyzippedwhenunitisrunningLaboratories, Inc., in accordance with

toavoidflyingdebrisUseonlyrecom.- UL Standard 1017. mendedattachments.

•Avoidsituationswhichcouldsetthe If situations occur which are not covered collectionbagonfireDonotvacuum. in this manual, use care and good judg-

discardedmatches,cigars,cigarettes,ment. If you need assistance, contact orashfromfireplaces,barbecuepits, your Sears Service Center or call

brushpiles,etcToavoidspreading. 1-800-235-5878. Failure to follow all

fire,donotuseblowernearleafor Safety Rules and Precautions can result

brushfires,fireplaces,barbecuepits, in serious injury. ashtrays,etc.

SAVE THESE INSTRUCTIONS

CARTON CONTENTS

Model 358.799430

•Blower

•Blower Tube/Nozzle

•2 Vacuum Tubes

•Collection Bag

Examine parts for damage. Do not use damaged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-235-5878.

_WARNING: Stop the unit and

disconnect from the power source be- fore opening the inlet cover or attempt- ing to insert or remove the inlet restrictor, blower tube/nozzle, or vacuum tubes. The motor must be stopped and the im- peller blades no longer turning to avoid serious injury from the rotating blades.

,t_	If received as-
dt_WARNING:

sembled, ensure your unit is properly assembled and all fasteners are secure.

BLOWER ASSEMBLY

NOTE: Assembly instructions for using

your unit as a vacuum follow this sec- tion.

ATTACHING THE BLOWER TUBE/ NOZZLE

If you have already assembled your unit for use as a vacuum, remove the

vacuum tubes and the collection bag.

1.Insert the blower tube/nozzle into the blower outlet.

2.Twist the blower tube/nozzle

clockwise until it is firmly seated in the blower outlet. Make sure the

nozzle end points upward as shown in the following illustration.

Blower Tube/Nozzle

VACUUM ASSEMBLY

NOTE: Assembly instructions for using your unit as a blower are explained in the previous section.

If you have already assembled your unit for use as a blower, remove the blower tube/nozzle.

5