CONTAINER MOUNTING (See Fig. 3)
1.Install one container to left side first. Install another container to center position and one in right position.
NOTE: Left edge of right container should always overlap right edge of left container at center supports.
2.Close cover and lock latch handles over center support tubes.
CENTER
SUPPORT
TUBES
CONTAINER
HANDLE
LOWER CHUTE (See Fig, 4)
1.Raise and hold deflector shield in upright position.
2.Place slot in lower chute over mountingtab on mower and position lower chute over mower opening as shown.
3.Hook rear latch into flange hole on back of mower.
4.Hook front latch into tab hole on front of mower.
•If your tractor is equipped with gauge wheels on the deck, then it will be necessary to hook the rear latch into the hole in the R.H. gauge wheel bracket.
CAUTION: Do not remove deflector shield from mower, Raise and hold
shield when attaching lower chute and allow it to rest on chute while in
operation.
REAR GAUGE
WHEEL
BRACKET
WiTH REAR
GAUGE WHEELS
REAR LATCH
COVER LATCH
HANDLES
FIG.3
DEFLECTOR SHIELD
HINGE BRACKET
MOUNTING TAB
DEFLECTOR
SHIELD
03058
FRONT
LATCH
FiG. 4
WITHOUT | REAR LATCH |
GAUGE WHEELS |
|
6
