4.Roadtesttractorforproperstopping distanceasstatedaboveReadjustif. necessaryIfstoppingdistancestill. greaterthansix(6)feetinhighest gear,furthermaintenanceisneces- sary.Contactyournearestautho-
rized service center/department.
With Parking Brake "Engaged"
TRANSMISSION REMOVAL/REPLACE- MENT
Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See =PURGE TRANSMISSION" in the Operation section of this manual.
TO ADJUST STEERING WHEEL ALIGN- MENT
Arm
Do Not b h this nut. If further brake
adjustment is necessary contact your nearest authorized service center/department
TO REPLACE MOTION DRIVE BELT
Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.
1, Remove mower (See "TO REMOVE
MOWER" in this section of this manual.)
2.Disconnect clutch wire harness.
3.Remove clutch Iocetor.
4.Remove belt from stationary idler and clutching idler.
5.Pull belt slack toward rear of tractor.
Carefully remove belt upwards from transmission input pulley and over cooling fan blades.
6.Pull belt toward front of tractor and
electric dutch.
7.Install new belt by reversing above procedure.
ElectricClutch
ClutchLocator
remove downwards from around
Clutchin_
Idler
TransrniStati°naldlerssion I_
Input Pulle_ | Wire Harness |
If steering wheel crossbars are not hodzontal (left to dght) when wheels are positioned straight forward, remove steedng wheel and reassemble per
instructionsin the Assembly section of this manual.
FRONT WHEEL TOE-IN/CAMBER
The front wheel
not adjustable on yourtractor. If damage has occurred to affect the front wheel tee-
in or camber, contact your nearest Sears or other qualified service canter.
TO REMOVE WHEEL FOR REPAIRS
1.Block up axle securely.
2.Remove axle cover, retaining dng and washers to allow wheel removal (rear wheel contains a square key - Do not lose).
3.Repair tire and reassemble.
NOTE: On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.
4.Replace washers and snap retaining dng securely in axle groove.
5.Replace axle cover.
NOTE: To seal tire punctures and prevent fiat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.
ZZ_g_g _
(Rear Wheel Only)
25Square Key_
