3.ATTACH MOWER SIDE SUSPENSION

ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with retainer spring.

4.Repeat on opposite side of tractor.

5.ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer

and retainer spring.

6.ATTACH FRONT LINK (E) - Work from left side of tractor. Insert rod end of link

assembly through front hole in tractor front suspension bracket (F).

7.Insert end of link (E) into hole in front mower bracket (H) and secure with washer and retainer spring (J).

8.Hook end of clutch cable spring (Q) into hole in idler arm (R).

9.Push clutch cable housing guide (P) into bracket, slide collar (L) onto guide and secure with retainer spring (K).

10.Install belt onto engine pulley (M) and belt keepers (G).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

11.Raise attachment lift lever to highest position.

12.If necessary, adjust gauge wheels before

operating mower as shown in the Opera- tion section of this manual.

%

03042rex

21

Page 21
Image 21
Craftsman 917.28934 owner manual Attach Mower Side Suspension