NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

Recheck measurements, adjust if nec- essary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

TO REPLACE MOWER DRIVE BELT

MOWER DRIVE BELT REMOVAL

1.Park tractor on a level surface. Engage parking brake.

2.Lower attachment lift lever to its lowest position.

3.Disengage belt tension rod (K) from

ock bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and re- lease slowly.

4.Remove screws (P) from R.H. and LH. mandrel covers and remove covers (Q).

5.Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

6.Remove belt from electric clutch pulley (M), both mandrel pulleys (R) and all idler pulleys (S).

MOWER DRIVE BELT INSTALLATION

1.Install belt around both mandrel pulleys (R)and around idler pulleys (S) as shown.

2.Install belt onto electric clutch pulley (M).

iMPORTANT: Check belt for proper rout- ing in all mower pulley grooves.

3.Reassemble R.H. and L.H. mandrel covers (Q). Securely tighten all screws.

4.Engage belt tension rod (K) on locking bracket (L).

CAUTION" Belt tension rod is spring loaded. Have a tight grip on rod and en-

gage slowly.

5.Raise attachment lift lever to highest position.

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For ease of service there

is a belt installation guide decal on bottom of left footrest.

BELT REMOVAL -

1. Remove mower (See "TO REMOVE MOWER" in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Disconnect clutch wire harness (A).

3.Remove anti-rotation link (B) on right side of tractor.

4.Remove belt from stationary idler (C) and clutching idler (D).

5.Remove belt from centerspan idler (E).

6.Pull belt slack toward rear of tractor.

Carefully remove belt upwards from transmission input pulley and over cooling fan blades (F).

7.Remove belt downward from engine pulley and around electric clutch (G).

8.Slide belt toward rear of tractor, off the steering plate (H)and remove from tractor.

BELT INSTALLATION -

1.Install new belt from tractor rear to front, over the steering plate (H) and above clutch brake pedal shaft (J).

2.Pull belt toward front of tractor and roll belt around electric clutch and onto

engine pulley (G).

3.Putt belt toward rear of tractor. Care- fully work belt down around transmis- sion cooling fan and onto the input pulley (F). Be sure belt is inside the belt keeper.

26

Page 26
Image 26
Craftsman 917.28990, YT 4500 manual To Replace Mower Drive Belt Mower Drive Belt Removal, Mower Drive Belt Installation

YT 4500, 917.28990 specifications

The Craftsman 917.28990 YT 4500 is a robust lawn tractor that combines power and performance with comfort and ease of use, making it an ideal choice for homeowners with medium to large yards. With its impressive features and innovative technologies, this machine stands out in the competitive landscape of lawn care equipment.

At the heart of the Craftsman YT 4500 is a powerful 24 HP Kohler engine. This engine delivers reliable performance, ensuring that the tractor can tackle a variety of tasks from mowing to hauling and even towing. With a 42-inch cutting deck, the YT 4500 effectively maneuvers through tight corners and delivers a clean, professional-looking cut on your lawn.

One of the standout features of the Craftsman YT 4500 is its hydrostatic transmission, which provides effortless control and smooth operation. This technology allows users to change speed and direction easily without the need for constant gear shifting, enhancing the user experience, especially over extended periods of use.

The tractor also boasts a comfortable high-back seat with adjustable features, providing ample support during long mowing sessions. The ergonomically designed steering wheel allows for easy maneuverability, making it suitable for users of all sizes.

To improve efficiency, the YT 4500 is equipped with a cutting height adjustment feature, allowing users to select from multiple cutting heights to accommodate various grass types and conditions. This flexibility ensures optimal results year-round.

Additionally, the Craftsman 917.28990 includes a mulching feature, which finely chops grass clippings and returns them to the lawn as natural fertilizer, promoting a healthier lawn while reducing the need for bagging clippings. For those requiring extra versatility, the tractor is compatible with various attachments, including snow plows, baggers, and more, enabling year-round tasks.

Overall, the Craftsman 917.28990 YT 4500 is an excellent investment for any homeowner seeking reliability, comfort, and versatility in a lawn tractor. Its combination of power, advanced technologies, and thoughtful design ensures that lawn care can be both efficient and enjoyable. Whether you are tackling a simple mow or an extensive landscaping project, the YT 4500 proves to be a valuable addition to your outdoor equipment lineup.