•With engine level, refill to point of overflowing if necessary. Replace oil filler plug.

•For cold weather operation you should

change oil for easier starting (See "OIL VISCOSITY CHART" in the Mainte-

nance section of this manual).

•To change engine oil, see the Mainte- nance section of this manual.

Oil Level

Plug

Oil Filler

ADD GASOLINE

•Fill fuel tank. Use fresh, clean, regular

unleaded gasoline. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life.)

IMPORTANT: When operating in tempera-

tures below 32°F(0°C), use fresh, clean, winter grade gasoline to help insure good cold weather starting.

_WARNING: Experience indicates that alcohol blended fuels (called gasohol or

using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage section of this manual for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may

Occur.

ACAUTION: Fill to within 1/2 inch of top of

fuel tank to prevent spills and to allow for fuel expansion. If gasoline is accidentally spilled, move machine away from area of spill. Avoid creating any source of ignition until gasoline vapors have disappeared.

Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

TO START ENGINE

_CAUTION: Keep tine control in "OFF" position when starting engine.

When starting engine for the first time or if engine has run out of fuel, it will take extra pulls of the recoil starter to move fuel from the tank to the engine.

•Make sure spark plug wire is properly connected.

•Place throttle control in "FAST" position.

•Move choke control to full "CHOKE"

position. Grasp recoil starter handle with one hand and grasp tiller handle with other hand. Pull rope out slowly until engine reaches start of compression cycle (rope will pull slightly harder at this point).

•Pull recoil starter handle quickly. Do not let starter handle snap back against starter. Repeat if necessary.

•If engine fires but does not start, move choke control to half choke position. Pull recoil starter handle until engine starts.

•When engine starts, slowly move choke control to "RUN" position as engine

warms up,

NOTE: A warm engine requires less choking to start.

•Move throttle control to desired running position.

•Allow engine to warm up for a few minutes before engaging tines.

NOTE: If at a high altitude (3000 feet) or in cold temperatures (below 32°F), the carburetor fuel mixture may need to be adjusted for best engine performance.

See "TO ADJUST CARBURETOR" in the Service and Adjustments section of this manual.

NOTE: If engine does not start, see troubleshooting points.

Control

Control

Recoil Stal

9

Page 8 Page 10
Page 9
Image 9
Craftsman 917.292394 owner manual To Start Engine, ADD Gasoline
Page 8 Page 10

917.292394 specifications

The Craftsman 917.292394 is a remarkable lawn tractor that exemplifies durability, efficiency, and ease of use. Designed for homeowners with medium to large-sized lawns, this riding mower combines power with innovative features, making it a favorite among lawn care enthusiasts.

One of the standout features of the Craftsman 917.292394 is its reliable engine. Powered by a robust 19 horsepower Briggs & Stratton engine, this tractor delivers reliable starting and performance in various conditions. The engine is paired with a hydrostatic transmission, which allows for seamless acceleration and easy operation, enabling the operator to focus on mowing without the hassle of shifting gears manually.

The cutting deck on the Craftsman 917.292394 is another feature that enhances its performance. With a cutting width of 42 inches, the mower can cover a substantial area in a single pass. The deck height is adjustable, allowing users to customize their mowing experience depending on the type of grass and the desired cut length. This flexibility not only contributes to a neat appearance but also promotes healthy grass growth.

For added convenience, this model includes a comfortable high-back seat, providing ample support during extended periods of mowing. The ergonomically designed steering wheel and intuitive control layout ensure that the operator can maneuver the tractor with ease, reducing fatigue over time.

The Craftsman 917.292394 also boasts several technologies aimed at improving efficiency and safety. Its turn radius is small, making it easy to navigate around obstacles like flower beds and trees. Additionally, the mower features anti-scalp wheels, which protect the lawn from damage while maintaining a clean cut.

Maintenance is simplified with the deck wash system, which allows for easy cleaning of the mower deck, ensuring optimal performance and longevity. The easy-access oil filter and maintenance-free battery contribute to hassle-free upkeep, making it suitable for users who may be less experienced with lawn equipment.

In conclusion, the Craftsman 917.292394 lawn tractor is a versatile and reliable option for homeowners who take pride in their lawns. Its combination of power, comfort, and user-friendly features make it an excellent choice for maintaining a beautiful outdoor space. With thoughtful engineering and practical technologies, this lawn tractor continues to be a valuable asset for those who seek efficiency and quality in their yard care efforts.
Top Page Image Contents