PROBLEMEngineoverheats
Excessive bounce/
difficult handling
Soil balls up or
clumps
Engine runs but
tiller won't move
Engine runs but
labors when tilling
CAUSE
1. Low oil level/dirtyoil.
2. Dirty,engineair screen.
3. Dirtyengine.
4. Partially plugged muffler.
5. Impropercarburetor
adjustment.
1. Ground too dry and hard.
2. Wheels and depth stake
incorrectlyadjusted.
1. Ground too wet,
1.
2.
3.
1.
2.
3.
"linecontrol is not engaged.
V-beltnot correctlyadjusted.
V-beltis off pulley(e).
1311ingtoodeep.
Throttle control not properly
adjusted.
Carburetor out ofadjustment,
CORRECTION
1. Check oil level/change oil.
2. Clean engine air screen.
3. Clean cylinder tins,air screen, muf
tierarea.
4. Remove and clean muffler.
5. Adjustcarburetor to ricberposi
tion.
1. Moisten groundor wait for more
favorablesoil conditions.
2. Adjust wheels and depth stake.
1, Walt for more favorable soil condi
tions.
1 Engage tins control.
2 Perform_ne Operation Check.
3. InspectV-bait.
1. Set depth stake for shallower till
ing.
2. Check throttle control setting.
3. Make necessary adjustments.
18