The operation of any lawn SAFETVG'ASSESmower can result in foreign

objects thrown into the eyes, which can result in severe

eye damage. Always wear safety glasses or eye shields while oper- ating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses orwide vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

Engine speed was set at the factory for optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

_I,CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the

risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which

requires the operator to be positioned behind the lawn mower handle to start

and operate the lawn mower.

DRIVE CONTROL

•Self-propelling is controlled by holding the operator presence control bar down

to the handle and pulling either drive control lever rearward to the handle. The further toward the handle a lever is

pulled, the faster the unit will travel.

. Forward motion will stop when either the operator presence control bar or a drive control lever are released. To stop forward motion without stopping engine, release a drive control lever only. Hold operator presence control bar down against handle to continue mowing without self-propelling.

NOTE: If after releasing the drive control the mower will not roll backwards, push the mower forward slightly to disengage drive wheels.

Operator presence control bar

become "loose", resulting in decreased speed. There is a turnbuckle on the drive control housing to increase tension on the drive cable. Proceed as follows:

1.Turn unit off and disconnect spark plug wire from spark plug.

2.Rotate turnbuckle on drive control to increase drive speed.

3.Operate mower to test drive speed. Readjust as required.

4.If condition fails to improve after the above steps (forward speed remains the same), your drive belt is worn and should be replaced.

ustment

turnbuckle

TO ADJUST CUTTING HEIGHT

Both front wheels are adjusted by a single lever on the left front wheel. Likewise,

both rear wheels are adjusted by a single lever on the left rear wheel.

•Pull adjuster lever toward wheel. To raise mower, move lever forward to

desired position. To lower mower, move the lever backward to desired position.

Be sure to adjust both front and

rear wheels

to the same height.

Height

_djuster lever

LEVER BACKWARD

TO LOWER MOWER

\ \

\

\

/

LEVER FORWARD

TO RAISE MOWER

TO CONVERT MOWER

control levers

TO ENGAGE DRIVE CONTROL

DRIVE CONTROL DISENGAGED

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may

Your lawn mower was shipped ready to be used as a mulcher. To convert to rear

bagging or side discharging:

REAR BAGGING

Remove knob securing mulcher door to lawn mower housing.

Open mulcher door and insert tabs of discharge chute into hinge bracket opening and position rear of chute over

9threaded stud.

Page 8 Page 10
Page 9
Image 9
Craftsman 917.371030 Engine Speed, Engine Zone Control, Drive Control, To Adjust Cutting Height, To Convert Mower
Page 8 Page 10

917.371030 specifications

The Craftsman 917.371030 is a reliable and robust lawn tractor designed for homeowners with medium to large yards. Known for its durability and performance, this tractor combines power and ease of use, making it an excellent choice for lawn maintenance tasks. With its powerful engine and versatile features, the Craftsman 917.371030 stands out among its competitors.

One of the main features of the Craftsman 917.371030 is its 24 HP Briggs & Stratton engine. This powerful engine provides ample torque and speed, making mowing through thick grass or uneven terrain efficient. The automatic transmission allows for seamless speed transitions, ensuring that users can easily navigate through their yards without the hassle of manually shifting gears.

The tractor is equipped with a 42-inch cutting deck, which enables a wide cutting path for faster mowing. The deck's design also features a three-blade system, resulting in a quality cut and making it easy to mulch or discharge grass clippings. With adjustable cutting heights, users can customize their lawn’s appearance to their preferences, achieving a beautifully manicured look.

In terms of technology, the Craftsman 917.371030 features a comfortable operator station. The seat is ergonomically designed with an adjustable back, providing maximum comfort during extended mowing sessions. The easy-access controls allow the operator to maneuver the lawn tractor effortlessly, while a clear dashboard display shows important information such as fuel levels and speed.

Safety is paramount, and the Craftsman 917.371030 includes important safety features, such as a brake that automatically engages when the operator leaves the seat and a durable frame that can withstand tough conditions. The tractor also has a tight turning radius, allowing for easy navigation around obstacles like trees and flower beds.

Maintenance is made simple with the Craftsman 917.371030, as it comes equipped with an easy-to-clean deck and convenient access to the engine for routine checks. Built to last, the durable construction materials and quality engineering ensure that this lawn tractor can withstand the demands of mowing season after season.

In summary, the Craftsman 917.371030 is an excellent lawn tractor that offers a combination of power, versatility, and comfort, making it a perfect choice for homeowners looking to maintain their lawns effectively. With its impressive cutting capabilities, user-friendly features, and commitment to safety, it remains a popular option in the lawn care community.
Top Page Image Contents