_I,CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

•Clean the underside of your lawn mower

by scraping to remove build-up of grass and trash.

•Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life.

•Keep finished surfaces and wheels free of al! gasoline, oil, etc.

•We do not recommend using a garden hose to clean lawn mower unless the electrical

system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

WATER WASHOUT FEATURE

Your lawn mower is equipped with a fitting that allows quick and easy cleaning of the underside of the housing. To use this feature, proceed as follows:

1. Move lawn mower to an area of cut grass or another hard surface.

NOTE: Water, grass and other debris will drain from beneath the mower housing during the washout process.

2.Remove grass catcher and discharge chute assembly from lawn mower.

3.Close mulcher door (if equipped).

4.Connect a garden hose to the fitting where shown.

IMPORTANT: Be sure the garden hose is not routed under the lawn mower housing or entangled in the wheels.

5.Turn on water supply and check for leaks at the fitting.

If no leaks are present, start engine (as described in the Operation section of this manual) and let engine run until the under- side of the lawn mower is clean.

,i& WARNING: Do not engage the drive system during the washout process.

6.Shut off the engine.

7.Shut off water supply and remove hose

from fitting.

CAUTION: Do not remove hose from

fitting while engine is running. Water in engine can result in shortened engine life.

8.Start engine (as described in the Op- eration section of this manual) and let

engine run for a full minute to remove excess water from mower.

Hose

Fitting

CLEAN UNDER DRIVE COVER

Clean under drive cover at least twice a season. Scrape underside of cover with putty knife or similar tool to remove any

build-up of trash or grass on underside of drive cover.

WARNING: To avoid serious injury, before performing any service and adjustments:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual.

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If deflector becomes damaged, it should be replaced.

TO REMOVE DRIVE BELT

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Remove screws retaining drive cover and remove drive cover from lawn

mower housing (See Figure A).

16

Page 15 Page 17
Page 16
Image 16
Craftsman 917.371031 Water Washout Feature, Clean Under Drive Cover, Lawn Mower To Adjust Cutting Height, Rear Deflector
Page 15 Page 17

917.371031 specifications

The Craftsman 917.371031 is a versatile lawn tractor designed to meet the demands of homeowners seeking a reliable and efficient lawn care solution. Specifically engineered for both precision and durability, this model is equipped with various features that enhance user experience and performance, allowing users to maintain their lawns with ease.

One of the standout features of the Craftsman 917.371031 is its powerful engine. The tractor is equipped with a robust 20 HP Briggs & Stratton engine, which provides ample power for tackling tough mowing tasks. This engine is known for its longevity and dependable performance, ensuring that users can count on it to start easily and run smoothly even in challenging conditions.

The cutting deck of the Craftsman 917.371031 features a 42-inch design, perfectly sized for maneuvering through residential yards while providing an efficient cutting path. The deck is constructed from high-quality, durable materials that offer superior resistance to wear, further enhancing the longevity of the mower. Additionally, the mowing height can be easily adjusted with a simple lever, allowing users to achieve their desired grass length quickly.

In terms of technology, features like the electric start engine simplify the startup process, eliminating the need for cumbersome pull cords. The integrated hydrostatic transmission provides seamless speed control, enabling the operator to navigate various terrains with ease. This feature allows for both forward and reverse motion without the need for clutching or shifting gears, providing a smoother driving experience.

Comfort is also a priority in the Craftsman 917.371031. It includes a comfortable, high-back seat that provides support during longer mowing sessions, minimizing fatigue and ensuring a more enjoyable experience. The ergonomic steering wheel design allows for easier maneuverability, making it simple to navigate tight corners or intricate landscaping.

Another notable characteristic of this lawn tractor is its user-friendly dashboard. Equipped with clear gauges, users can easily monitor speed, fuel level, and maintenance indicators, ensuring that they can keep the tractor in optimal condition. Safety features, including blade brake and while disengaged, ensure that the tractor operates reliably and safely.

Overall, the Craftsman 917.371031 provides an exceptional lawn care experience with its powerful engine, durable cutting deck, and user-friendly technologies, making it a worthy investment for any homeowner looking to keep their yard in pristine condition.
Top Page Image Contents