HOW to USE Your Lawn Mower

The operationof any lawn mowercan result in foreign objectsthrowninto the

eyes,whichcan resultin severeeye damage.Always

wear safety glassesor eye shieldswhile operatingyour lawn moweror performing any adjustmentsor repairs.We recom- menda standardsafetyglassesor wide visionsafetymaskwornover spectacles.

ENGINE SPEED

The engine speed was set at the factory for optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

_I_CAUTION: Federal regulations require

an engine control to be installed on this lawn mower in order to minimize the

risk of blade contact injury. Do not under

any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which

requires the operator to be positioned behind the lawn mower handle to start

and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit

your requirements. Medium position is best for most lawns.

•To change cutting height, squeeze ad- juster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9- position adjusters (if so equipped) allow lever to be positioned between the plate tabs.

LEVER BACKWARD

TO LOWER MOWER

Plate

LEVER FORWARD TO RAISE MOWER

TO CONVERT MOWER

Your mower is shipped ready to be used as a mulcher. To convert to bagging or discharging:

•Lift discharge guard and remove mulcher plate.

•Mower can now be used for side discharge or optional grass catcher can be attached.

•To return to mulching operation, simply reinstall mulcher plate as shown.

_CAUTION: Do not run your lawn mower without discharge guard, approved grass catcher or mulcher plate in place.

Hinge rod

Discharge

Housing opening

Hooks

Mulcher plate

Tab

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual.

•i, CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler

on startup.

1.Be sure lawnmower is level.

2.Remove oil dipstick from oil fill spout.

3.You receive a container of oil with the unit. Slowly pour the entire container

down the oil fill spout into the engine. NOTE: Initial oil fill requires only 18 oz. due to residual oil in engine from the

manufacturers 100% quality testing. When changing oil you may need 20 oz.

4.Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil

if needed. Fill to full line on dipstick.

•Change the oil after every 25 hours of operation or each season. You may need to change the oil more often

under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Mainte-

nance section of this manual.

ADD GASOLINE

•Fill fuel tank to bottom of tank filler neck.

Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Pur- chase fuel in quantities that can be used

within 30 days to assure fuel freshness.

A CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

917.37134 specifications

The Craftsman 917.37134 is a versatile and powerful lawn mower designed for both residential and commercial mowing needs. Known for its reliability and efficiency, this model has become a popular choice among homeowners and landscapers alike.

One of the standout features of the Craftsman 917.37134 is its robust engine. It is equipped with a reliable 21-inch cutting deck, powered by a dependable gas engine. This provides the necessary power and torque to tackle tough grass and uneven terrain with ease. The mower’s engine is designed for easy starting and smooth operation, minimizing downtime during lawn care.

Another key characteristic of the Craftsman 917.37134 is its innovative cutting technology. The mower employs a three-in-one cutting system, allowing users to choose between side discharge, mulching, or bagging clippings. This versatility means that users can manage their lawn maintenance effectively, whether they prefer leaving the clippings on the lawn for added nutrients or collecting them for disposal.

The Craftsman 917.37134 also features adjustable cutting height settings, allowing operators to customize the grass height according to their preferences or seasonal requirements. This ensures that the lawn can receive the right amount of care throughout the year, promoting healthier growth and appearance.

To enhance user convenience, the mower is designed with a comfortable grip handle and is easy to maneuver. Its lightweight construction allows for effortless handling and turning, reducing fatigue during extended mowing sessions. The adjustable handle height further improves ergonomics, meeting the needs of various users.

Durability is another hallmark of the Craftsman brand, and the 917.37134 is no exception. Its sturdy construction and high-quality materials ensure it can withstand the rigors of regular lawn maintenance while providing longevity. Maintenance is also simplified with easy access to the engine and deck components, making it user-friendly for anyone who prefers to conduct their own upkeep.

In conclusion, the Craftsman 917.37134 is a well-rounded lawn mower that combines power, versatility, and ease of use. It’s equipped with advanced cutting technology, a durable design, and features that enhance the mowing experience, making it a reliable choice for anyone looking to maintain their lawn effectively. Whether for personal or professional use, this mower stands out in its class.

Craftsman 917.37134 owner manual HOW to USE Your Lawn Mower, Before Starting Engine ADD OIL

Models: 917.37134