LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check rear drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash,

grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both rear wheels.

5.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

6.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

BLADE CARE

For best results, mower blade must be kept

sharp. Replace a bent or damaged blade. A CAUTION: Use only a replacement

blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from

turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware (bolt, lock washer, hardened washer).

6.Remove debris shield.

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position blade adapter on engine crank- shaft. Be sure key in adapter and crank-

shaft keyway are aligned; and that drive belt is inside tabs of belt retainer.

2.Install debris shield.

3.Position blade on the blade adapter. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on blade adapter.

4.Be sure the trailing edge of blade (oppo- site sharp edge) is up toward engine.

 

 

Belt

 

retainer

 

Trailing

edge

Blade adapter

 

 

 

Hardened

Debris shield

washer

 

Lockwasher

Blade

Blade

bolt

TO SHARPEN BLADE

NOTE: We do not recommend sharpening

blade - but if you do, be sure blade is bal- anced. An unbalanced blade will cause

eventual damage to mower or engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a

5/8" diameter steel bolt, pin, ora cone bal- ancer. (When using a cone balancer, follow instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center hole

5/8" bolt or pin

14Blade

Page 14
Image 14
Craftsman 917.374101 manual Lawn Mower, Drive Wheels

917.374101 specifications

The Craftsman 917.374101 is a versatile and reliable lawn mower designed to meet the needs of homeowners seeking to maintain a well-manicured lawn with ease. Renowned for its durability and efficient performance, this mower brings a robust set of features and technologies that prioritize user comfort and effective yard care.

One of the standout characteristics of the Craftsman 917.374101 is its powerful engine. Equipped with a 190cc Briggs & Stratton engine, it provides ample power for cutting through thick grass and tackling uneven terrain. This engine is designed to offer reliable starting performance, ensuring that users can quickly get to work without the frustration of long startup times.

The mower features a 21-inch steel cutting deck, which not only ensures a wide cutting path for quicker mowing sessions but also enhances durability. This material ensures longevity and reduces the likelihood of deck damage over time. The adjustable cutting height feature allows users to choose from multiple settings, ranging from 1.25 inches to 3.75 inches, accommodating various grass types and mowing preferences.

Another key feature of the Craftsman 917.374101 is its easy maneuverability. The mower is designed with a lightweight frame that allows for effortless navigation around trees, flower beds, and other obstacles in the yard. Coupled with its rear bagging capability, users can efficiently collect grass clippings, making cleanup simpler and facilitating a cleaner lawn appearance.

Technologically, this model includes a reliable self-propulsion system that alleviates the strain of pushing the mower manually. This feature not only ensures efficient mowing but also enhances user control, making it easier to navigate slopes and varied terrain. Additionally, the mower is designed with user-friendly controls, making adjustments straightforward and intuitive.

Safety features like the blade brake and the foldable handle for compact storage further enhance the usability of the Craftsman 917.374101. The easy-to-use controls and ergonomic design make it suitable for a wide range of users, from novice homeowners to experienced landscapers.

Overall, the Craftsman 917.374101 stands out as a practical solution for lawn maintenance needs. Its powerful engine, versatile cutting deck, innovative self-propulsion technology, and user-centric design all contribute to making yard work efficient, effective, and enjoyable. Whether for small residential lawns or larger estates, this mower delivers a reliable performance that meets the challenges of diverse mowing tasks.