The operation of any lawn SAFETVG'ASSESmower can result in foreign

objects thrown into the eyes, which can result in severe

eye damage. Always wear safety glasses or eye shields while oper- ating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses orwide vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

Engine speed was set at the factory for optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

• ILCAUTION: Federal regulations require

an engine control to be installed on this lawn mower in order to minimize the

risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which

requires the operator to be positioned behind the lawn mower handle to start

and operate the lawn mower.

DRIVE CONTROL

•Self-propelling is controlled by hold- ing the operator presence control bar

down to the handle and pulling the drive control lever rearward to the handle.

The further toward the handle the lever

is pulled, the faster the unit will travel.

. Forward motion will stop when either the operator presence control bar or drive control lever are released. To stop forward motion without stopping engine, release the drive control lever only. Hold operator presence control bar down against handle to continue mowing without self-propelling.

NOTE: If after releasing the drive control the mower will not roll backwards, push the mower forward slightly to disengage drive wheels.

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may become "loose", resulting in decreased speed. There is a turnbuckle on the drive control housing to increase tension on the drive cable. Proceed as follows:

1.Turn unit off and disconnect spark plug wire from spark plug.

2.Rotate turnbuckle on drive control to increase drive speed.

3.Operate mower to test drive speed. Readjust as required.

4.If condition fails to improve after the above steps (forward speed remains the same), your drive belt is worn and should be replaced.

Adjustment turnbuckle

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit

your requirements. Medium position is best for most lawns.

•To change cutting height, pull up on adjuster lever, move wheel up or down

to suit your requirements and release adjuster lever. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when lever inserts into hole in plate.

LEVER BACKWARD 4 i

TO LOWER MOWER

Plate

Operator presence control bar Drive control

TO

 

lever

ENGAGE

DRIVE

LEVER

DRIVE

CONTROL

FORWARD

CONTROL

DISENGAGED

8 TO RAISE MOWER

 

 

Page 7 Page 9
Page 8
Image 8
Craftsman 917.374351 manual Engine Speed
Page 7 Page 9

37435, 917.374351 specifications

The Craftsman 917.374351 and 917.37435 lawn tractors are high-performance machines designed to meet the demands of homeowners looking for a reliable and efficient way to maintain their lawns. These models boast a blend of power, durability, and advanced features that enhance user experience, making them ideal for various gardening tasks.

One of the standout features of the Craftsman 917.374351 and 917.37435 is their powerful engine. They are equipped with robust Briggs & Stratton engines, which are known for their reliability and ease of maintenance. This power enables the tractors to handle different terrains and grass lengths, ensuring a clean and efficient cut every time. The engines deliver excellent torque and performance, allowing users to tackle even the most challenging mowing tasks with ease.

Another noteworthy characteristic is the cutting deck. Both models come with a durable steel deck that measures 42 inches in width. This design allows for a wider cutting area, reducing the time needed for mowing large lawns. The cutting height can be easily adjusted, providing versatility to achieve the desired grass length. With multiple cutting heights available, users can adapt to various grass types and conditions.

In terms of technology, Craftsman has incorporated user-friendly features into the 917.374351 and 917.37435 models. The ergonomic steering wheel and comfortable seat are designed for extended use, ensuring that operators remain comfortable even during longer mowing sessions. Additionally, the tractors include a built-in deck wash system, simplifying maintenance by making it easier to keep the underside of the deck clean and free of grass buildup.

Each model also includes a hydrostatic transmission, offering smooth and easy control while navigating through the yard. This technology allows for effortless speed adjustments without the need for gear shifting, which can be particularly beneficial when maneuvering around obstacles or changing terrain.

Furthermore, the Craftsman 917.374351 and 917.37435 are equipped with rear-wheel drive, enhancing traction and stability on uneven surfaces. This feature helps improve performance on slopes and inclines, ensuring consistent results regardless of the landscape.

In summary, the Craftsman 917.374351 and 917.37435 lawn tractors combine powerful engineering with thoughtful design, creating a user-friendly experience. With a reliable engine, versatile cutting capabilities, and advanced features, these models are an excellent choice for homeowners seeking quality and efficiency in lawn care.
Top Page Image Contents