TO REPLACE DRIVE BELT

1.Place new drive belt in engine pulley and belt retainer of debris shield.

2.Route the other end of the new drive belt through hole in housing.

3.Reinstall debris shield.

4. Reinstall blade.

5.Return mower to upright position.

6.Push down on arm, install new belt on

gearcase pulley. Release arm slowly. NOTE: Always use factory approved belt to assure proper fit and long life.

7.Reinstall drive cover.

TO ADJUST HANDLE

The handle can be mounted in a high or

low position. The mounting holes in the bottom of lower handle are off center for

raising or lowering the handle.

1.Remove upper handle and all wire tie(s) securing cable(s) to lower handle.

2.Remove hairpin cotters from lower handle bracket mounting pin.

3.Squeeze lower handle in to remove it

from mounting pins.

4.Turn lower handle over to raise or lower handle.

5.Squeeze lower handle in and position holes onto mounting pins on bracket.

6.Reassemble upper handle and all parts removed from lower handle.

SQUEEZE

TO ADJUST

Lower handle

Mounting pin

Handle

Hairpin cotter

J

\

\

\

Lower handle

ROTATE

ENGINE

ENGINE SPEED

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that engine is running too fast or too slow, take your mower to a Sears or other qualified service center for repair and adjustment.

CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to sus- pected carburetor problems, take your lawn mower to a Sears or other qualified service center for repair and/or adjustment.

IMPORTANT: Never tamperwith the engine governor, which is factory set for proper en- gine speed. Overspeeding the engine above the factory high speed setting can be danger-

ous. If you think the engine-governed high speed needs adjusting, contact a Sears or other qualified service center, which has proper equipment and experience to make any necessary adjustments.

15

Page 14 Page 16
Page 15
Image 15
Craftsman 917.375632 To Replace Drive Belt, To Adjust Handle, Squeeze To Adjust, Rotate Engine Engine Speed, Carburetor
Page 14 Page 16

917.375632 specifications

The Craftsman 917.375632 is a robust and reliable riding lawn mower designed for residential homeowners who desire efficiency and performance in their lawn care. This model stands out with its innovative technologies and user-friendly features, making it an excellent choice for those who seek to maintain their outdoor spaces effortlessly.

One of the main features of the Craftsman 917.375632 is its powerful engine. Equipped with a 19 HP Briggs and Stratton engine, this mower ensures sufficient power to tackle a variety of mowing tasks, whether you're cutting through thick grass or navigating hilly terrains. The engine’s design promotes fuel efficiency and long-lasting performance, allowing users to complete their mowing without frequent refueling.

The Craftsman 917.375632 also features a 42-inch cutting deck, which strikes a balance between maneuverability and cutting width. This size is ideal for medium to large yards, allowing for efficient mowing while reducing the number of passes required to achieve a well-manicured lawn. The cutting height can be easily adjusted to five different positions, enabling users to choose the perfect height for their grass type and seasonal needs.

Another noteworthy characteristic of this riding mower is its user-friendly design. The comfortable, high-back seat is designed for optimal support, minimizing fatigue during extended mowing sessions. Additionally, the intuitive dashboard includes easy-to-read gauges and controls, making operation straightforward for users of all experience levels.

Incorporating advanced technologies, the Craftsman 917.375632 boasts a robust cutting system that ensures a clean and even cut. Its mulching capability allows grass clippings to be finely chopped and redistributed back onto the lawn, returning valuable nutrients to the soil. The mower also features a front bumper guard and a durable construction that enhances its ability to withstand the rigors of outdoor use.

Moreover, the Craftsman 917.375632 includes a reinforced frame that contributes to its overall stability and durability, ensuring it can handle rough and uneven terrains. The transaxle transmission provides smooth gear shifting, allowing users to effortlessly navigate through different mowing speeds.

In summary, the Craftsman 917.375632 combines power, efficiency, and user comfort, making it an exceptional choice for homeowners looking to enhance their lawn care routine. With its practical features and advanced technologies, it ensures a pleasant mowing experience while delivering impressive results.
Top Page Image Contents