LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check front drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash,

grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both front wheels.

1.Remove hubcaps, Iocknuts & washers.

2.Remove wheels from wheel adjusters.

3.Remove any trash or grass cuttings from inside the dust cover, pinion and/ or drive wheel gear teeth.

4.Put wheels back in place.

NOTE: If after cleaning, the drive wheels do not turn freely, contact a Sears or other qualified service center.

BLADE CARE

For best results, mower blade must be kept sharp. Replace a bent or damaged blade. A CAUTION: Use only a replacement blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and

mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware

(bolt, lock washer, hardened washer). NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position the blade adapter on the en- gine crankshaft. Be sure key in adapter and crankshaft keyway are aligned.

2.Position blade on the blade adapter.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on blade adapter.

3.Be sure trailing edge of blade (opposite sharp edge) is up toward the engine.

4.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

5.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

Blade adapter

Key

Crankshaft

Lockwasher

 

 

 

 

(-

Blade

 

,,

Blade

 

,,,), ....

 

bolt

Hardened

:',,,,

\ ",,

 

washer

Trailin/edge

retainer

TO SHARPEN BLADE

NOTE: We do not recommend sharp-

ening blade - but if you do, be sure the blade is balanced. An unbalanced blade

will cause eventual damage to lawn mower or engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with it.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center hole

5/8" bolt or pin

13Blade

Page 13
Image 13
Craftsman 917.376540 manual Lawn Mower, Drive Wheels

37654, 917.376540 specifications

The Craftsman 917.376540 and 917.37654 are standout lawn tractors that embody reliability, performance, and user-friendly features. Designed for homeowners looking to efficiently maintain their lawns, these tractors are an ideal choice for different yard sizes and terrains.

One of the main features of these models is their robust engine. Equipped with a powerful Kohler engine, both the 917.376540 and 917.37654 deliver consistent performance, ensuring that grass cutting is both effective and efficient. The engine offers reliable starting and plenty of torque, allowing for smooth operation even on challenging terrain. This power is complemented by an automatic transmission, providing seamless gear shifts that enhance ease of use and comfort during operation.

The cutting deck is another highlight of these tractors. With a wide 42-inch cutting path, it allows users to cover a significant area in a shorter amount of time, making lawn maintenance quicker and more efficient. The deck is designed for a clean and even cut, ensuring a healthy lawn. Additionally, the height adjustment lever allows users to easily set the cutting height according to their preferences or seasonal needs.

Craftsman has also integrated advanced technologies into these models, offering features such as a mulch kit and side discharge options. This versatility enhances the tractor’s functionality, allowing homeowners to choose how they want to manage their grass clippings. The optional bagger attachment is perfect for those who prefer a clean lawn with all clippings collected for disposal or composting.

Comfort plays a significant role in the design of these tractors as well. The plush, adjustable seat provides ergonomic support for extended mowing sessions. The easy-to-use controls are within reach, ensuring an intuitive operation throughout each task. Furthermore, the compact size of these tractors makes them easy to maneuver, allowing users to navigate tight corners and small spaces with ease.

In summary, the Craftsman 917.376540 and 917.37654 lawn tractors are built for performance and convenience. With their efficient engines, effective cutting decks, and user-oriented designs, these models are excellent investments for anyone seeking to maintain a beautiful lawn with minimal hassle. Whether tackling large yards or intricate landscaping, these tractors rise to the challenge, making them a popular choice among homeowners.