![](/images/new-backgrounds/1095612/9561235x1.webp)
TROUBLESHOOTING
PROBLEM
Excessive vibration
Starter rope hard
topull
CHART
CAUSE
1.Wom, bentor loose blade.
2.Bent engine crankshaft.
1.Engineflywheel brake is on when controlbar is released.
2.Bent engine crankshaft.
3.Blade adapter brokan.
4.Blade dragging in grass.
CORRECTION
1.Replace blade. "Rghten blade bolt.
2.Contact an authorized servicecenter.
1.Depress controlbar to upper handle before pullingstarter rope.
2.Contact an authorized service center.
3.Replace blade adapter.
4.Move lawn mower to cut grass or to hard surface
Gross catcher | 1. | Cuttingheighttoo low. |
notftlling0fso | 2. | Lifton bladeworn off. |
equipped) | 3. | Catchernot venting air. |
Hard to push | 1. | Grass is too highor wheel |
|
| height is too low. |
| 2. | Rear of lawn mower |
|
| housingor blade drag_ng |
|
| in grass. |
| 3. | Grasscatchertoo full. |
| 4. | Handle height position not |
|
| _ht for you. • |
1.Raise cuttingheighL
2.Replace blade.
3.Clean grass catcher.
1.Raise cuttingheight.
2.Raise rear of lawn mower housing ore (1) setting higher.
3.Emptygrasscatcher.
4.Adjusthandle heightto suit.
18