LUBRICATION CHART

Wheel

adjuster (on each wheel)

Handle bracket mounting pins

_ Spray lubricant

See "ENGINE" in Maintenance section.

IMPORTANT: Do not oil or grease plastic

wheel bearings. Viscous lubricants will attract dust and dirt that will shorten the life of

the self-lubricating bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly.

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

BLADE CARE

For best results, mower blade must be kept sharp. Replace a bent or damaged blade.

_i, CAUTION: Use only a replacement blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is hazardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and

mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware (bolt, lock washer, hardened washer).

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position the blade adapter on the en- gine crankshaft. Be sure key in adapter and crankshaft keyway are aligned.

2.Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter.

3.Be sure trailing edge of blade (opposite sharp edge) is up toward the engine.

4.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

5.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated.

If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

Blade adapter

Key

Crankshaft

Lockwasher _

i

bolt Hardened d'ge

washerCrankshaft

TO SHARPEN BLADE

NOTE: We do not recommend sharpening

blade - but if you do, be sure the blade is balanced. An unbalanced blade will cause

eventual damage to mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, drive a nail into a beam or wall. Leave about one inch of

the straight nail exposed. Place center hole of blade over the head of the nail.

If blade is balanced, it should remain in a horizontal position. If either end of the

blade moves downward, sharpen the

11heavy end until the blade is balanced.

Page 10 Page 12
Page 11
Image 11
Craftsman 917.385123 owner manual Lubrication Chart, Tires
Page 10 Page 12

917.385123 specifications

The Craftsman 917.385123 is a robust lawn tractor designed to provide optimal performance and efficiency for homeowners who take pride in maintaining their yards. This versatile machine stands out in the Craftsman lineup due to its remarkable features and advanced technologies that enhance its functionality and ease of use.

One of the key features of the Craftsman 917.385123 is its powerful engine. Equipped with a reliable Briggs & Stratton motor, this lawn tractor offers sufficient horsepower to tackle various mowing conditions, from flat lawns to hilly terrains. The engine operates smoothly and delivers consistent power, ensuring that users can complete their lawn care tasks with efficiency.

Another hallmark of the Craftsman 917.385123 is its cutting deck. The tractor features a durable 42-inch cutting deck that provides a wide mowing path, enabling users to cover more ground in less time. The cutting height is adjustable, allowing for customization according to the lawn's needs and the desired aesthetic. This feature is particularly useful for maintaining a healthy lawn by promoting even growth.

The tractor is also designed with user comfort in mind. It includes a spacious, ergonomic seat that provides excellent support during extended periods of operation. The innovative steering system offers precise maneuverability, making it easy to navigate around obstacles, trees, and flower beds.

Technologically, the Craftsman 917.385123 is equipped with a hydrostatic transmission, enabling seamless speed adjustments without the need for manual gear changes. This feature enhances the riding experience, as users can smoothly transition from fast to slow speeds, ensuring optimal control while mowing.

Maintenance is simplified with the easy-access design of the mower deck and engine components. The inclusion of a built-in washout port makes cleaning the cutting deck hassle-free, promoting longevity and effective performance.

Overall, the Craftsman 917.385123 combines power, efficiency, and user-friendly design, making it an excellent choice for diligent homeowners. Its standout features, such as the reliable engine, adjustable cutting deck, and hydrostatic transmission, contribute significantly to its reputation as a dependable lawn tractor in the Craftsman family. Whether tackling routine lawn maintenance or preparing for seasonal landscaping projects, this tractor is equipped to handle the job with ease and effectiveness.
Top Page Image Contents