BEFORESTARTINGENGINE ADDOIL Yourlawnmowerisshippedwithoutoilin

theengine. Engine holds 20 oz. of oil.

For type and grade of oil to use, see "ENGINE" in Maintenance section of this

manual.

1.Be sure lawnmowar is level and area around oil fill is clean.

2.Remove engine oil cap and fill to the full line on the dipstick. Pour oil slowly. Do not over fill.

NOTE: Allow oil to settle down into engine for accurate reading. To read proper level, tighten engine oil cap, then remove it to road the dipstick.

3.Reinstall engine oil cap and tighten.

• Check oil level before each use. Add

oil if needed. Fill to full line on dipstick.

•Change the oil after ever./25 hours of operation or each season. You may need to change the oil more often

under dusty, dirty conditions.

ADD GASOLINE

•Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gaso- line. Purchase fuel in quantities that

can be used within 30 days to assure fuel freshness.

AWARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an

engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

_, CAUTION: Fill to bottom of gas tank filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

Engineoil cap __._=_l..._ _'- Gasolinefiller

TO START ENGINE

NOTE: Due to protective coatings on the engine, a small amount of smoke may be present during the initial use of the product and should be considered normal.

1.To start a cold engine, push primer three (3) times before trying to start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few minutes.

2.Hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

TO STOP ENGINE

•To stop engine, release operator presence control bar.

NOTE: In cooler weather it may be necessary to repeat pdming steps. In warmer weather over priming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before attempting to start and do not repeat priming steps.

Page 7 Page 9
Page 8
Image 8
Craftsman 917.38862 owner manual ADD Gasoline, Engineoil cap .=l... Gasolinefiller, To Start Engine, To Stop Engine
Page 7 Page 9

917.38862 specifications

The Craftsman 917.38862 is a versatile and reliable lawn tractor designed for homeowners who prioritize efficiency and ease of use in their lawn care regimen. This model features a robust engine and a durable build, making it suitable for various outdoor tasks, from mowing to yard maintenance.

At the heart of the Craftsman 917.38862 is a powerful 19 horsepower, 540cc engine. Known for its reliability, this engine ensures that the tractor can handle tough mowing jobs and navigate different terrains with ease. The automatic transmission provides a seamless operation, allowing for smooth gear shifts without the need for manual intervention.

One of the standout features of the Craftsman 917.38862 is its 42-inch cutting deck. This size strikes a balance between maneuverability and efficiency, allowing the user to navigate tight spaces while still covering a substantial area. The cutting height can be easily adjusted between multiple settings, enabling users to achieve the desired lawn finish, whether it's a low, manicured look or a slightly taller cut.

The dual-blade design enhances the mower's performance, delivering a clean cut and promoting healthy grass growth. Additionally, the mulching capability of the Craftsman 917.38862 allows homeowners to recycle grass clippings back into the lawn, thereby enriching the soil and reducing yard waste.

Ergonomics is another consideration in the design of the Craftsman 917.38862. The seating is comfortable and adjustable, ensuring that users can maintain a good posture during longer mowing sessions. The intuitive dashboard includes essential controls for ease of operation, including a switch for the blade engagement and easy-to-read instrumentation.

Furthermore, the Craftsman 917.38862 is equipped with features like a built-in headlights, enhancing visibility during early morning or late evening mowing. The durable construction of the tractor, combined with protective features such as fenders and a sturdy frame, ensures longevity and resilience against the elements.

Overall, the Craftsman 917.38862 embodies the qualities that homeowners look for in a lawn tractor: power, reliability, user-friendly design, and advanced features that cater to various lawn care needs. With this model, maintaining a beautiful lawn becomes an enjoyable and efficient task.
Top Page Image Contents