Manuals / Craftsman / Lawn and Garden / Trimmer

Craftsman 917.77376 owner manual Handle, Engine OIL, Cylinder, Engine Fuel System

Models: 917.77376

1 44
Download 44 pages 12.71 Kb
Page 14
Image 14

Immediately prepare your trimmer for stor- age at the end of the season or if the unit will not be used for 30 days or more.

TRIMMER

When trimmer is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dryarea.

1.Clean entire trimmer (See"CLEANING" in the Maintenance section of this manual).

2.Lubricate as shown in the Maintenance section of this manual.

3.Be sure that all nuts, bolts, screws, and

pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

4.Touch up all rusted or chipped paint

surfaces; sand lightly before painting.

HANDLE

You can fold your trimmer handle for storage.

•Loosen handle knob enough to allow upper handle to be folded forward.

IMPORTANT: When folding the handle for

storage or transportation, be sure to fold the handle as shown or you may damage the control cables.

Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage.

Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix

ratio found on stabilizer container. Run

engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach

the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in

the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

Handle knob

ENGINE

FUEL SYSTEM

iMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose or tank during storage.

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your unit indoors and cover it to protect it from dust and dirt.

•Cover your unit with a suitable protective

cover that does not retain moisture. Do

not use plastic. Plastic cannot breathe,

which allows condensation to form and

will cause your unit to rust.

IMPORTANT: Never cover trimmer while

engine and exhaust areas are still warm.

AI:ICAUTION: Never store the trimmer with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before

14 storing in any enclosure.

Page 13 Page 15
Page 14
Image 14
Craftsman 917.77376 owner manual Handle, Engine OIL, Cylinder, Engine Fuel System
Page 13 Page 15

917.77376 specifications

The Craftsman 917.77376 is a robust lawn tractor designed to deliver reliable performance and functionality to homeowners and landscapers alike. With its powerful engine and versatile features, this model caters to a wide range of mowing and lawn care needs.

One of the standout features of the Craftsman 917.77376 is its 24 HP Briggs & Stratton engine, which is known for its durability and efficient fuel consumption. This powerful engine provides sufficient torque to handle tough mowing tasks, making it ideal for larger yards with thick grass. The engine is coupled with a hydrostatic transmission, allowing for smooth and effortless speed adjustments without the need for clutching or shifting. This technology not only enhances the user’s mowing experience but also reduces operator fatigue.

The mower deck on the Craftsman 917.77376 is another impressive aspect of its design. With a cutting width of 42 inches and an innovative three-blade system, it ensures a clean and even cut across various grass types. The deck is adjustable, providing the flexibility to set cutting heights anywhere from 1.5 to 4 inches, accommodating different seasonal mowing requirements.

In addition to its cutting capabilities, the Craftsman 917.77376 is equipped with advanced features that enhance maneuverability and ease of use. The tight turning radius allows it to navigate around obstacles and flowerbeds with ease. The comfortable, high-back seat supports prolonged use, making it suitable for anyone tackling extensive mowing tasks.

Safety is paramount in the design of the Craftsman 917.77376. The model includes a blade brake safety feature that automatically stops the blades when the operator stands up from the seat, preventing accidental injuries. Additionally, its rugged build and stable wheelbase contribute to a safe and stable ride on various terrains.

Overall, the Craftsman 917.77376 is engineered for efficiency, comfort, and safety, making it a preferred choice for homeowners looking for a reliable lawn tractor. With its blend of power, versatility, and advanced features, this model promises a premium lawn care experience, turning yard maintenance into a less daunting and more enjoyable task. Whether you are maintaining a small garden or tackling a large lawn, the Craftsman 917.77376 delivers outstanding performance and durability.